I recently upgraded my whole setup and need to clear out some space.
Located in the Triangle Area in North Carolina.
Starter Kit - $400 obo
- 8 gal homebrew ss kettle with lid and ball valve
- 90,000 btu propane burner
- 7 gal fermonster plastic carboy with valve and airlock
- Yeast starter stir plate - new in box
- ss counterflow chiller
- also have some extra lengths of high temp silicone tubing and other ss fittings if desired
2 tap Keezer - 7cu ft - $350
- Insulated wood collar mounted to the lid
- 2 perlick faucets with wood tap handles
- 2 ea. 5ft beer line with ball lock quick disconnects (recently cleaned)
- 2 ea 5ft co2 line with ball lock quick disconnects
- magic chef hmcf7w4 - 7 cu ft freezer (note: Dent in the back, but only cosmetic. Used for a long time with no issues)
- komos regulator (note: will need a 2 way distributor to hook both co2 lines)
- wood cart with 4 heavy duty casters
- 2 computer fans (helps to circulate air)
- 1 eva dry dehumidifier
- 1 dual stage temperature controller (northern brewer)
- 1 power strip
- 1 plug timer (used to cycle fans on and off)
plenty of extra room inside to add up to 2 more kegs and taps
- collar was built tall enough to allow for keg clearance when on the compressor hump
I recently upgraded to a larger kegerator, so I no longer use this one.
10 gal Cooler Mash Tun - $100 obo
- 10 gal screw top beverage cooler
- stainless false bottom
- ball valve
- sparge arm
Electric Keggle - $200
- Converted 1/2 bbl electric keggle
- 5500 watt / 240 volt heating element
- thermometer probe to connect to a brew controller
- plus one extra probe with a different connection type
- insulated jacket
- center pickup with ball valve
Electric Brewery Panel - 30a - $300
I bought this from a friend, and had the plans to rebuild and upgrade it. Don't have the time anymore
- design is based on the 30a electric brewery panel plans
- some components missing or may need to be replaced
* in a disassembled/non working state
- extra wire and connectors
If your looking to build a panel then this is a great point to get started.
Can reuse many of the parts, and will include existing wiring.
Willing to consider all offers
no shipping
Located in the Triangle Area in North Carolina.
Starter Kit - $400 obo
- 8 gal homebrew ss kettle with lid and ball valve
- 90,000 btu propane burner
- 7 gal fermonster plastic carboy with valve and airlock
- Yeast starter stir plate - new in box
- ss counterflow chiller
- also have some extra lengths of high temp silicone tubing and other ss fittings if desired
2 tap Keezer - 7cu ft - $350
- Insulated wood collar mounted to the lid
- 2 perlick faucets with wood tap handles
- 2 ea. 5ft beer line with ball lock quick disconnects (recently cleaned)
- 2 ea 5ft co2 line with ball lock quick disconnects
- magic chef hmcf7w4 - 7 cu ft freezer (note: Dent in the back, but only cosmetic. Used for a long time with no issues)
- komos regulator (note: will need a 2 way distributor to hook both co2 lines)
- wood cart with 4 heavy duty casters
- 2 computer fans (helps to circulate air)
- 1 eva dry dehumidifier
- 1 dual stage temperature controller (northern brewer)
- 1 power strip
- 1 plug timer (used to cycle fans on and off)
plenty of extra room inside to add up to 2 more kegs and taps
- collar was built tall enough to allow for keg clearance when on the compressor hump
I recently upgraded to a larger kegerator, so I no longer use this one.
10 gal Cooler Mash Tun - $100 obo
- 10 gal screw top beverage cooler
- stainless false bottom
- ball valve
- sparge arm
Electric Keggle - $200
- Converted 1/2 bbl electric keggle
- 5500 watt / 240 volt heating element
- thermometer probe to connect to a brew controller
- plus one extra probe with a different connection type
- insulated jacket
- center pickup with ball valve
Electric Brewery Panel - 30a - $300
I bought this from a friend, and had the plans to rebuild and upgrade it. Don't have the time anymore
- design is based on the 30a electric brewery panel plans
- some components missing or may need to be replaced
* in a disassembled/non working state
- extra wire and connectors
If your looking to build a panel then this is a great point to get started.
Can reuse many of the parts, and will include existing wiring.
Willing to consider all offers
no shipping
