C cpbergie Well-Known Member Joined Jan 2, 2007 Messages 212 Reaction score 1 Location San Diego Jul 24, 2007 #1 Can someone tell me or show me a link to what tubing i should use to go from my keggle to my pump (and then into a CFC)? My pump is rated for High temp, and uses a 1/2 inch connector.
Can someone tell me or show me a link to what tubing i should use to go from my keggle to my pump (and then into a CFC)? My pump is rated for High temp, and uses a 1/2 inch connector.
Pabst Blue Robot Well-Known Member Joined Oct 31, 2005 Messages 453 Reaction score 8 Location Puyallup, WA Jul 24, 2007 #2 I used high temp silicon tubing rated to 500 F. You can get it at AHS or B3, probably at the other ones too. It's about $2/ft.
I used high temp silicon tubing rated to 500 F. You can get it at AHS or B3, probably at the other ones too. It's about $2/ft.
david_42 Well-Known Member Joined Oct 8, 2005 Messages 25,581 Reaction score 196 Location Oak Grove Jul 24, 2007 #3 Same stuff I use. Ain't cheap, but poly softens when it gets hot and collapses on the suction side & pops off on the out.
Same stuff I use. Ain't cheap, but poly softens when it gets hot and collapses on the suction side & pops off on the out.
Bobby_M Vendor and Brewer HBT Sponsor Joined Aug 3, 2006 Messages 27,901 Reaction score 9,275 Location Whitehouse Station, NJ Jul 24, 2007 #4 I use the thick walled vinyl tubing from lowes that has the reinforcing string in it. It doesn't collapse.
I use the thick walled vinyl tubing from lowes that has the reinforcing string in it. It doesn't collapse.
natehilde Well-Known Member Joined Nov 3, 2006 Messages 100 Reaction score 8 Location Colorado Jul 24, 2007 #5 3/8" stainless steel tubing is very sexy!!!!
OP OP C cpbergie Well-Known Member Joined Jan 2, 2007 Messages 212 Reaction score 1 Location San Diego Jul 24, 2007 #6 Thanks. i wasnt sure if the lowes tubing was food grade, but i guess its good.