Don't think a fermenter will fit.
I've seen photographic evidence. I'm inclined to believe it.
Just want to say thanks for the info. Picked up one a few weeks ago, with the highest setpoint 7 (lowest temp) I was getting down to 49 or so with one corny. Yesterday I took a look at the temp control mechanism/thermostat assembly. On the back left corner of the little box that houses the tstat is a small screw with an access hole. I used a small phillips and gave it a 1/2 turn clockwise and it dropped the temp below 40. Basically it seems putting more pressure on the spring increases the amount of force required by the tstat.
I've seen photographic evidence. I'm inclined to believe it.
Enter your email address to join: