you might check out U.S. Composites for your clearcoat
I am planning on getting my epoxy from US Composites. It'll probably be a while. I don't have quite enough bottle caps to get the coverage I want. We'll see I may just scrap the whole cap idea and go with something more "classy" and use tile or something. Who knows.
Which freezer is this?
Do you have a parts list by chance?
Any pics of the inside?
I haven't taken any pictures of the inside yet, because there is nothing really in there. Just some grain and hops and a keg full of StarSan. I haven't organized the beer and gas lines in there yet either. I'll get to it one of these days. Probably after I get the beer brewed.
I used the GE 7.0 FCM7SUWW from Home Depot. I got it for 199.00. It fits 3 ball lock Cornies. All of my basic designs are in the album linked in my opening post. That should get you started. I think some of the measurements are slightly off though so you'll have to double check them. I think I did the math with a 2x4 equaling exactly 2" by 4".
Other than that... I used a handful of 8' 2x4s, a sheet of 3/4" sanded plywood, a sheet of 1/4" sanded plywood, some styrofoam insulation, and some assorted stainable trim pieces. I got the faucets and lines and regulator from Keg Connection; it was the 3 tap set. I can't remember where I got the temp control, but it's the Love TSX-10140 if I remember correctly. I got the drip tray from
http://www.coffeemakersetc.com/; it is the Curtis DTP-13. I got the cold cathode light from Fry's. That's about it really.
I haven't kept a running tally of the cost. I bought the tap kit while I was deployed to Afghanistan almost 6 months ago. Definitely under $1000 for the whole nine yards. (I'm talking the WHOLE nine yards... kegs, lines, CO2, freezer, lumber, controller, stain, paint.... you get the idea.) I'm afraid to add everything up though. I don't know what my wife to realize exactly how much it cost! Just kidding, honey!
There will be a few pictures to come. I'll be more that happy to answer any questions!