Overwhelmed - Help Building HERMS Controller System

[In_Vino_Veritas]

I first posted this in the DIY; oversight on my part that there's a dedicated section for automating. May I get a little more additional help per the following:

Ok, so I'm very pleased with how my heat exchanger coil within my HLT turned out. I'm just not sure where to go with the controller system. It will be a propane setup, plan on continuously pumping and I would like for the temp probe to be inline on the return to the mash tun, unless others have found mash tun exit to be better. I need the controller, igniter, solenoid, probe with well and what every else I've missed within the system. Does any one have a bill of material build for a setup as described? Willing to spend a few hundred, maybe 200 to 300 range, maybe a little more; I just can't spring for some like the Tower Of Power.

THANKS YOU VERY MUCH in advance, I'm really lost where to go!!!

 

[muhteeus]

I first posted this in the DIY; oversight on my part that there's a dedicated section for automating. May I get a little more additional help per the following:

Ok, so I'm very pleased with how my heat exchanger coil within my HLT turned out. I'm just not sure where to go with the controller system. It will be a propane setup, plan on continuously pumping and I would like for the temp probe to be inline on the return to the mash tun, unless others have found mash tun exit to be better. I need the controller, igniter, solenoid, probe with well and what every else I've missed within the system. Does any one have a bill of material build for a setup as described? Willing to spend a few hundred, maybe 200 to 300 range, maybe a little more; I just can't spring for some like the Tower Of Power.

THANKS YOU VERY MUCH in advance, I'm really lost where to go!!!

[Redacted]

Posted some incorrect info. Let me find what you need!
Other than that your plans (and budget) are sound.