BrewReiver
Member
- Joined
- Mar 17, 2014
- Messages
- 10
- Reaction score
- 1
Greetings, this is my first post here, and I am a new brewer. I am having a problem with a mead recipe that I have done successfully twice before.
24 hours later, no airlock action at all, and when I look at the must there is very little if any foam on the top. Should I try to add more energizer and/or nutrient? I have one more packet of Wyeast pitch, should I perhaps add that? Last two batches I made were bubbling far before the 24 hour mark.
thanks for any help.
- I have 21 pounds of honey in a five gallon bucket.
- Filled water up to the 5 gallon line after mixing in Honey.
- I am using Wyeast 4184
- I added nutrient and energizer right after the pitch.
24 hours later, no airlock action at all, and when I look at the must there is very little if any foam on the top. Should I try to add more energizer and/or nutrient? I have one more packet of Wyeast pitch, should I perhaps add that? Last two batches I made were bubbling far before the 24 hour mark.
thanks for any help.