I dont have an extra fridge to carb so Im carbing at 72 degrees at 31 psi. I let my beer carb for 2 weeks and I want to draw into a growler to refrigerate and drink after a few hours.
I relieved the pressure and set to 2-3 psi, my liquid line fills with foam, then looks like its drawing solid but I get a lot of foam. I had this problem before bet never solved it. I looked at threads and saw that I could drop the pressure low and let it sit for a couple of days...but wouldn't that just let me lose all of the carbonation I was working to put in? I have a 5 ft 1/2 inch hose which I will replace with a 3/16 10 ft tomorrow. But am I missing anything else that I didnt see in another thread?
I relieved the pressure and set to 2-3 psi, my liquid line fills with foam, then looks like its drawing solid but I get a lot of foam. I had this problem before bet never solved it. I looked at threads and saw that I could drop the pressure low and let it sit for a couple of days...but wouldn't that just let me lose all of the carbonation I was working to put in? I have a 5 ft 1/2 inch hose which I will replace with a 3/16 10 ft tomorrow. But am I missing anything else that I didnt see in another thread?