How to program a STC1000???

[birdley123]

Its been a long time since i used mine, now i need to program a dif temp and cant remember the steps?
Help a brewer out!!
Thanks...

 

[doug293cz]

1. Press and hold the "Set" button until the display reads "F1".
2. Release the "Set" button.
3. Press and hold the "Set" button. Display should read current programmed temperature.
4. While continuing to hold the "Set" button, press the up or down arrow until the desired temp is displayed.
5. Release the "Set" button and press and release the "On/Off" button. This last step is what actually sets the new temo.

Brew on

 

[day_trippr]

^That^ procedure is for the Set Point, not the Differential.
"F2" is the Differential setting...

STC-1000 user manual pdf file can be found here...

Cheers!

 

[doug293cz]

^That^ procedure is for the Set Point, not the Differential.
"F2" is the Differential setting...

STC-1000 user manual pdf file can be found here...

Cheers!

Oops, missed the "dif" in the OP. Sorry. Add step 1.5: While holding the "Set" button, press the down arrow to display "F2".

Brew on

 

[birdley123]

Perfect! Thanks guys!