brewyourown4life Well-Known Member Joined Feb 14, 2008 Messages 167 Reaction score 4 Location waterloo, IA Sep 21, 2009 #1 put this together from the plans in BYO mag. works great, changed the door hinges to the side, will build the next one out of plywood Last edited by a moderator: Feb 28, 2019
put this together from the plans in BYO mag. works great, changed the door hinges to the side, will build the next one out of plywood
Pappers_ Moderator Emeritus HBT Supporter Joined Jan 31, 2009 Messages 17,908 Reaction score 4,419 Location Chicago Sep 21, 2009 #2 Very cool, BYO4L.
Scut_Monkey Well-Known Member Joined Jan 28, 2009 Messages 2,624 Reaction score 18 Location Pittsburgh Sep 22, 2009 #3 Neato. Do you know approximately how much it cost you? Sorry if you mentioned it.
OP OP brewyourown4life Well-Known Member Joined Feb 14, 2008 Messages 167 Reaction score 4 Location waterloo, IA Sep 22, 2009 #4 the fan was 10$ at radio shack, the mdf was around 16$, the three 1x4's ripped in half 6$, screen, glue, screws,power supply,and the on-off switch i had on hand, so it looks like around 32$ for sure under 40$
the fan was 10$ at radio shack, the mdf was around 16$, the three 1x4's ripped in half 6$, screen, glue, screws,power supply,and the on-off switch i had on hand, so it looks like around 32$ for sure under 40$
Sawdustguy Well-Known Member Joined Mar 2, 2009 Messages 2,701 Reaction score 45 Location Manorville, New York Sep 23, 2009 #5 Very nice job, and for less than $40 to boot! You have inspired me to build one also.