gunner11
Well-Known Member
I carbed my stout with my CO2 tank and attached the 75/25 beer gas tank to the keg. Set the regulator to 30PSI and opened the valve. I can hear the gas going in like normal, but the sound does not completely disappear and if you put your ear near the regulator you can hear a slight audible hiss like a leak. It only makes this noise when I open the valve that is attached to the gas line. I have checked all around that seal and the regulator itself for leaks and can not find any. I have used a soap solution all over the gas line tubing seal and the regulator and can not find anything. The tank shows about 125 bar fill at the moment and the gauge went down a little 1 bar or so when on for about 10 minutes. I am not sure from experience is that is a normal decrease due to the gas going into the keg or it is leaking. Any help or thoughts would be appreciated. Thanks.