HausBrauerei_Harvey
Well-Known Member
I'm in the process of building out a second serving setup for british ales. It's a two tap black pipe draft tower build. A photo of it a few days ago is attached. I put the 90's for the taps on last night and measured and I think a 12" drip tray will be just a little too tight.
Thus I'd really like to get a 14 or 16" flush mount drip tray, very similar to the one in this link (photo below), just 14 or 16 inches long.
I want the flush mount tray without a drain so I can router out the maple top and the edge of the drip tray hides the lines from the cut wood for a clean finish.
I drove myself batty for a while this morning trying to find this type of drip tray online without any luck.
Thus I'd really like to get a 14 or 16" flush mount drip tray, very similar to the one in this link (photo below), just 14 or 16 inches long.
I want the flush mount tray without a drain so I can router out the maple top and the edge of the drip tray hides the lines from the cut wood for a clean finish.
I drove myself batty for a while this morning trying to find this type of drip tray online without any luck.
