For Sale SF Bay Area - Keezer loaded with extras for sale!

[ethorsen11]

I'm no longer brewing enough to keep my keezer full. This is a 7 cu ft freezer which can hold plenty of beer and CO2 equipment. All included
1. Configuration #1 = two 5-gallon kegs and one 2.5gal keg along with 10 lb CO2 tank
2. Configuration #2 (as shown in pictures) = five 2.5gal Torpedo kegs along with 10 lb CO2 tank
Features:

• Freezer painted black with oak stained collar and five Perlick Stainless Steel taps
• Manifold of five CO2 connectors, each with on/off valve, labeled at both ends for removal/replacement of tapped-out keg
• Individual Perlick taps connected to kegs, labeled at both ends for reference when removing/replacing tapped-out keg
• Magnetic Tool tray painted black for drip capture below kegs. Aluminum narrow tray sits on drip tray to capture drips from all five kegs
• Dimensions of keg (with collar) 38" H 23" W 25" D including taps
• Five 10 liter / 2.6gal Torpedo kegs Link
• Wil include 11 tasting glasses (approx 2 oz) and 20 pint glasses link
• Will also include chalkboard and two shelves for glass storage link
• Can replace standard plastic tap handles with wooden chalkboard tap handles- see pics for examples - Standard Perlick Black Plastic Handles Link Example of Labeled wood handles link
• Standard temperature control by Johnson controls with brass probe that sits in mason jar full of water to ensure proper beer temperature in kegs. See link for reference Temp set to 36 degrees F is very reliable
• All five 2.6g kegs and 10# CO2 tank fit easily inside Kegs and CO2 tank outside link and Inside Keezer Link Link
• Also includes Keg Cleaner - special cleaner attachment and ball-keg connector to quickly clean the keg. Comes with foot pedal switch to easily hold kegs in position and turn on and off the cleaner. Also includes a longer 1/2-inch pipe for 5gal kegs, and a homemade end for cleaning Carboys. (FYI the carboy necks are too narrow for the special cleaner attachment, this works great and fits in all sized carboys). Based on a youtube video. Works great - cleans kegs with hot soapy water in less than a minute. Then just sanitize and rack your beer to replace tapped out kegs quickly
• Includes a number of other things, like star san tap wrench, extra keg gaskets, chain for alternative mounting of temperature control, deep 11/16 socket for wrench that removes ball keg lugs, five rubber tap covers, and screws from original mounting of keezer lid (before installing collar) Also includes some ball keg adapters if you want to do a keg-keg pressurized transfer

Looking for $350 or best offer for entire setup - includes everything you need to serve your beer!

All pictures here in a google public album. Not sure if you need a gmail account or not - feel free to reach out to me for specifics if the pictures don't load

 

[Airborneguy]

Holy crap, this is some deal.

 

[cbier60]

Nice, but that certainly looks like a 5CF freezer, not 7. My 7CF holds 4-5 ball lock kegs on the floor, not 2.

 

[redrocker652002]

Damn, I wish I had the space. I would jump all over it. Might even do some measuring and see what I can come up with.

Looking at your desc, you say 23 wide, but then the tape in the pic shows 32? Width is a big detail so which is it?

 

[ethorsen11]

Damn, I wish I had the space. I would jump all over it. Might even do some measuring and see what I can come up with.

Looking at your desc, you say 23 wide, but then the tape in the pic shows 32? Width is a big detail so which is it?

Probably a typo - sorry - go with the pic. It's 32" wide, probably when I was looking at the pic of the depth - it's 23" deep, plus 2" for the tap handles

FWIW based on where we lived at the time, I had this sitting on a porch for a year, where there wasn't much space - back then I only had three taps so I cut out three holes for the taps on the side, and the keezer sat sideways on the porch. The drip tray is magnetic so it's fine on either side.

If you don't mind the depth of 32" you could totally install this sideways - would just need to drill two more holes for the extra taps, or just go with three holes!

 

[ethorsen11]

Damn, I wish I had the space. I would jump all over it. Might even do some measuring and see what I can come up with.

Looking at your desc, you say 23 wide, but then the tape in the pic shows 32? Width is a big detail so which is it?

Nice, but that certainly looks like a 5CF freezer, not 7. My 7CF holds 4-5 ball lock kegs on the floor, not 2.

Ah dang - thanks for the catch. I lost the original docs for the freezer, and painted over the specs on the back so I went by a google search. I searched for dimensions similar to mine - and they indicated 7CF on the unit I found on search.
Otherwise, the measurements are posted, and all gear comes with it for somebody who is interested - just FYI apparently it's not 7CF - thanks to cbier60 for the correction.

 

[ethorsen11]

Ah dang - thanks for the catch. I lost the original docs for the freezer, and painted over the specs on the back so I went by a google search. I searched for dimensions similar to mine - and they indicated 7CF on the unit I found on search.
Otherwise, the measurements are posted, and all gear comes with it for somebody who is interested - just FYI apparently it's not 7CF - thanks to cbier60 for the correction.

I found a pic from when I had it installed widthwise. It was tight space so I built a shelf from 2x4 above it and held my fermentation chamber (college fridge) and grainfather box there.

 

[ethorsen11]

This is sold. Thanks all for the feedback. Not sure how to remove this post so simply posting a comment that this is no longer available.