milldoggy
Well-Known Member
Been doing a lot of NEIPA recently and trying all sorts of way of dry hopping and limiting 02 in the kegs. I wanted to add all my dry hops to primary in the conical, but had issues kegging due to clogged pop it's.
I found brewers hardware wort filters
https://www.brewershardware.com/Wort-Strainers/ and thought I would give them a try.
Results, fantastic. I had 10 ozs in a 10g batch as dry hops(4oz on day 3, 6oz on day 7). On day 14 I kegged. Did not cold crash, ambient temperature when transferred.
You do need a conical that can be pressurized. My moonshine distiller conical does not hold very well. Had to use quick clamps all around the lid. Was ok with about 2psi.
I used a tc15 with a 200 micron screen. I ran it opposite as recommended instructions so I could vent all the air out. Did a test run the other direction and could not vent all the air out.
Below are some pics.
View attachment 1506910065470.jpg
View attachment 1506910079666.jpg
View attachment 1506910091417.jpg
View attachment 1506910102648.jpg
I found brewers hardware wort filters
https://www.brewershardware.com/Wort-Strainers/ and thought I would give them a try.
Results, fantastic. I had 10 ozs in a 10g batch as dry hops(4oz on day 3, 6oz on day 7). On day 14 I kegged. Did not cold crash, ambient temperature when transferred.
You do need a conical that can be pressurized. My moonshine distiller conical does not hold very well. Had to use quick clamps all around the lid. Was ok with about 2psi.
I used a tc15 with a 200 micron screen. I ran it opposite as recommended instructions so I could vent all the air out. Did a test run the other direction and could not vent all the air out.
Below are some pics.
View attachment 1506910065470.jpg
View attachment 1506910079666.jpg
View attachment 1506910091417.jpg
View attachment 1506910102648.jpg