I had these items posted in my 50A panel thread, but since I couldn't change the title of the post, I don't think anyone knew these items were there.
Kettles: they are set up pretty much exactly like Kal's pots at The Electric Brewery, but for 5G batches:
BK -- 10G Blichmann, with additional holes drilled for 1/2" NPT temp probe and a hole for an electric element. Hop Stopper included. I've had this pot for a while and it has seen some extract brew sessions.
HLT -- 15G non brand name heavy duty kettle, dimensions are ~18" diameter x ~15" tall. This has never been used other than for a couple leak tests. Included:
-- Pot w/bulkhead, valve, thermometer, diptube, & sight Glass
-- HERMES Coil with weldless bulkheads with 1/2" tube compression on the inside and 1/2" NPT on outside of pot, and 2 valves
-- Valve with nipple, elbow, and barb for water entry
MLT: 10G non name brand heavy duty kettle, dimensions are ~16" diameter x ~13" tall. This has never been used other than for a couple leak tests. The catch with this pot thought is there are three holes that I had welded shut as they were drilled in the wrong spot. Included:
-- Pot w/bulkhead, valve, thermometer (Blichmann adjustable), & diptube
-- Valve with nipple, elbow, barb, & hose for wort return
-- 12" SS false bottom with adapter
I will also include two lengths of wire to be used with the electric element, but I won't include the wired element (don't want the liability). I will also include the 30A twist locking plug ($13 each), but they also won't be wired.
I'd really like to try selling all three together. When added up this cost me about $1,500, not including any shipping or taxes. As most of you know, this stuff adds up fast. I'm asking $1,100, which doesn't include shipping.
Kettles: they are set up pretty much exactly like Kal's pots at The Electric Brewery, but for 5G batches:
BK -- 10G Blichmann, with additional holes drilled for 1/2" NPT temp probe and a hole for an electric element. Hop Stopper included. I've had this pot for a while and it has seen some extract brew sessions.
HLT -- 15G non brand name heavy duty kettle, dimensions are ~18" diameter x ~15" tall. This has never been used other than for a couple leak tests. Included:
-- Pot w/bulkhead, valve, thermometer, diptube, & sight Glass
-- HERMES Coil with weldless bulkheads with 1/2" tube compression on the inside and 1/2" NPT on outside of pot, and 2 valves
-- Valve with nipple, elbow, and barb for water entry
MLT: 10G non name brand heavy duty kettle, dimensions are ~16" diameter x ~13" tall. This has never been used other than for a couple leak tests. The catch with this pot thought is there are three holes that I had welded shut as they were drilled in the wrong spot. Included:
-- Pot w/bulkhead, valve, thermometer (Blichmann adjustable), & diptube
-- Valve with nipple, elbow, barb, & hose for wort return
-- 12" SS false bottom with adapter
I will also include two lengths of wire to be used with the electric element, but I won't include the wired element (don't want the liability). I will also include the 30A twist locking plug ($13 each), but they also won't be wired.
I'd really like to try selling all three together. When added up this cost me about $1,500, not including any shipping or taxes. As most of you know, this stuff adds up fast. I'm asking $1,100, which doesn't include shipping.