jcran17
Active Member
I recently bought a big lot of Ebrew items from a guy that was planning a 3 vessel HERMS and I was going to do the same. I decided to make an eBIAB instead and now have a lot of extra stuff to sell. I took pictures of everything globally, as it would be tough to include a picture of every item. let me know if there is something specific you want to see.
Below is a list of everything included. The excel file didn't paste perfectly, but the number after each item is how many are included. If you have specific questions, please ask. For pricing, I added up what everything would cost (not including shipping) and took 50% of that. This brought me to $700 local or $750 shipped.
I am going to give this a good run as a lot; I think it would be too big of a headache to split up.
Slanted enclosure (WC12C16WW) with holes cut 1
Auber PID SYL-2352 2
Auber Timer ASL-51 1
Mager SSR 40A 1
3-way 1/2" ball valve (CF8M) 1
Auber 34mm RTD 1/8" NPT 2
Madison liquid level switch M8700 1
Schneider 30A contactor DIN mount RPF2AF7 1
SS coupler 2" x 1" 1
5/8" compression elbow 1
1/2 NPT x 1/2" compression coupler 1
5/8" compression elbow (missing nut and compression ring) 1
L21-30R (female connector) 2
L21-30 (male inlet flange) 2
16ga x 24' primary wire (yellow, blue, white, green) 4
SSR heat sink 1
fuse holder 2
XLR female recept 3
XLR male recept 1
8mm terminal blocks (3-blue, 3-orange, 2-green) 8
6mm terminal block (2-black, 2-white, 4-red) 8
6mm pole jumpers (1, n=10 and 1, n=4) 1.5
terminal block end section 11
female camlock x 1/2" Female NPT (Type D) 4
male camlock x 1/2" Female NPT (Type A) 5
Automation direct push button (GCX1192-120) white 1
Automation direct push button (GCX1192-120) green 2
Automation direct push button (GCX1192-120) blue 2
yellow LED 110V 2
yellow 3-way maintained LED switch w/ 2 NO contact blocks 2
black 3-way maintained switch w/ 1 NO & 2 NC contact blocks 1
black 3-way maintained switch w/ 2 NC contact blocks 2
NC contact block 1
3/4" wire mounting pads (~100) 1
auber thermostat 1
1/2 NPT close nipples 2
heat sink 10.5" x 6.5" x 3.75" 1
Parker ball valve (1/2" compression) 8A-MB8LPFA-SSP 1
Below is a list of everything included. The excel file didn't paste perfectly, but the number after each item is how many are included. If you have specific questions, please ask. For pricing, I added up what everything would cost (not including shipping) and took 50% of that. This brought me to $700 local or $750 shipped.
I am going to give this a good run as a lot; I think it would be too big of a headache to split up.
Slanted enclosure (WC12C16WW) with holes cut 1
Auber PID SYL-2352 2
Auber Timer ASL-51 1
Mager SSR 40A 1
3-way 1/2" ball valve (CF8M) 1
Auber 34mm RTD 1/8" NPT 2
Madison liquid level switch M8700 1
Schneider 30A contactor DIN mount RPF2AF7 1
SS coupler 2" x 1" 1
5/8" compression elbow 1
1/2 NPT x 1/2" compression coupler 1
5/8" compression elbow (missing nut and compression ring) 1
L21-30R (female connector) 2
L21-30 (male inlet flange) 2
16ga x 24' primary wire (yellow, blue, white, green) 4
SSR heat sink 1
fuse holder 2
XLR female recept 3
XLR male recept 1
8mm terminal blocks (3-blue, 3-orange, 2-green) 8
6mm terminal block (2-black, 2-white, 4-red) 8
6mm pole jumpers (1, n=10 and 1, n=4) 1.5
terminal block end section 11
female camlock x 1/2" Female NPT (Type D) 4
male camlock x 1/2" Female NPT (Type A) 5
Automation direct push button (GCX1192-120) white 1
Automation direct push button (GCX1192-120) green 2
Automation direct push button (GCX1192-120) blue 2
yellow LED 110V 2
yellow 3-way maintained LED switch w/ 2 NO contact blocks 2
black 3-way maintained switch w/ 1 NO & 2 NC contact blocks 1
black 3-way maintained switch w/ 2 NC contact blocks 2
NC contact block 1
3/4" wire mounting pads (~100) 1
auber thermostat 1
1/2 NPT close nipples 2
heat sink 10.5" x 6.5" x 3.75" 1
Parker ball valve (1/2" compression) 8A-MB8LPFA-SSP 1