Dropped silicon tube into fermentor (Carboy)

[MrEggSandwich]

As I was chilling into fermentor, dropped 6 inch piece of silicon tubing into fermentor.

Thinking this is a non-issue. Ease my mind.

 

[brewcat]

If the tubing was sanitized the beer will be fine.

 

[TexasDroughtBrewery]

What he said ^^

 

[MrEggSandwich]

If the tubing was sanitized the beer will be fine.

Yup. Sanitized it prior to chilling..it slipped off fitting into carboy as I was pumping chilled wort into carboy.

 

[kristiismean]

non issue, unless you need it before the beer is done then of course it's not worth risking it to get it out....

 

[PADave]

Yup. Sanitized it prior to chilling..it slipped off fitting into carboy as I was pumping chilled wort into carboy.

No worries then.

 

[microbusbrewery]

Our 55 gallon club barrel has about a six inch section of silicon hose in there. We first noticed it during the last empty/refill so it might have been in there since way back when it had whiskey in it. Ours is a (intentionally) sour barrel, but +1 what everyone else said, you should be fine.