thestealth
Active Member
- Joined
- Aug 29, 2015
- Messages
- 39
- Reaction score
- 14
You didn't miss anything, working directly with the developer to make something spectacular. Stay tuned!
Now I'm intrigued!
You didn't miss anything, working directly with the developer to make something spectacular. Stay tuned!
Anyone know where a thread on what settings people are using in CraftBeerPi? For instance, what boil temp are you using when the kettle is configured for overshoot? Are you using Automatic or Manual control for boil? I only have one brew session complete using the software but I like it a lot.
Hey guys,
The main branch is now 2.2, so that will give you the option to invert your GPIO settings.
Also, fermentation is built in proper - and you can import beer.xml files.
Happy eBrewing!
$ git pull
/home/pi/craftbeerpi/
$ rm /home/pi/craftbeerpi/crafbeerpi.db
sudo python runserver.py
Traceback (most recent call last):
File "runserver.py", line 4, in <module>
from brewapp import app, socketio
File "/home/pi/craftbeerpi/brewapp/__init__.py", line 74, in <module>
from .base.views import base
File "/home/pi/craftbeerpi/brewapp/base/__init__.py", line 1, in <module>
import config
File "/home/pi/craftbeerpi/brewapp/base/config.py", line 4, in <module>
import yaml
ImportError: No module named yaml
I ran
Code:$ git pull
from
Code:/home/pi/craftbeerpi/
then, because I was getting a 404 error I ran
per the github wikiCode:$ rm /home/pi/craftbeerpi/crafbeerpi.db
Now it's broke. When I try to start the server with
Code:sudo python runserver.py
I get
Code:Traceback (most recent call last): File "runserver.py", line 4, in <module> from brewapp import app, socketio File "/home/pi/craftbeerpi/brewapp/__init__.py", line 74, in <module> from .base.views import base File "/home/pi/craftbeerpi/brewapp/base/__init__.py", line 1, in <module> import config File "/home/pi/craftbeerpi/brewapp/base/config.py", line 4, in <module> import yaml ImportError: No module named yaml
But I honestly don't know what I'm doing, really. Is this an issue with my installation? Should I start from scratch with a fresh install?
If you 404 during the pull you probably didn't get everything. I would try pulling again.
Thanks, I did try "git pull" again to no avail.
I was getting the 404 when trying to access the craftbeerpi server on my local network, which makes me guess the server is not running on the pi. This is why I tried to manually start it, getting the errors mentioned. It's easy enough to just start from scratch. After all, I'm just testing at this point and not running any hardware other than the sensors.
Have you tried starting it with this command?
sudo /etc/init.d/craftbeerpiboot start
You can change the temperature type from C to F in the configure menu of CraftBeerPi.Hello. I just installed craftbeerpi. I tried changing from Celsius to Fahrenheit by modifying the config,yaml file in the config directory and restarting craftbeerpi. The change didn't work. Am I missing something?
You might want to try delete the craftbeerpi.db file and refresh the page, I had the same issue as you and this sorted me out.
Have you tried starting it with this command?
sudo /etc/init.d/craftbeerpiboot start
You didn't miss anything, working directly with the developer to make something spectacular. Stay tuned!
I did try this since it is recommended on the GitHub Wiki. No Dice.
When I try this it tells me command not found, or something similar. When I try to navigate to /etc/init.d, I get "directory not found".
Thanks for the help, I've got some free time tonight, so I'll probably try to start from scratch. As I mentioned, I'm only taking the software for a test drive right now. I'm trying to decide if I want to go this route or StrangeBrew Elsinore.
Sounds like you might need to do a fresh pi install if the /etc/init.d/ folder isn't found.
FWIW I have used both SBE and CBP, and the fact that CBP is being actively supported, I have chosen to stick with it. SBE is great dont get me wrong - but I use Celsius and metric measurements and SBE doesn't support Celsius, so I couldn't use the automation triggers. Gutted though, it took 3 brews with constant crashes to figure that out, and I have now used CBP flawlessly, it is solid.
You can change the temperature type from C to F in the configure menu of CraftBeerPi.
We live and learn!!!Herp Derp. I didn't realize those were clickable links on the configure page. Thought it was read only.
Thanks.
PID all the way.
Yep.Did you use default pid settings?
It takes me 1 month from order date to my mailbox to get boards from Dirty Cheap PCBs.I'm in California.Update - I'm still waiting on the delivery of the boards / components from China. I think it's going to be a Festivus Miracle if they get here before Christmas. The cost of the boards alone will be $6 USD + shipping the complete kit with all the required components will be $20 USD + shipping and a full completed soldered board will be around $40/$50 USD + shipping. I also found a company that can ship things from Canada to the USA via USPS so shipping costs unless you want it next day should be reasonable. If you have any questions you can send me a PM. Thanks.
Enter your email address to join: