To save I:
-Made my own Crystal malt in several degrees L
What process do you use to make crystal malt??
-
I followed this that I found on a blog on the web:
http://barleypopmaker.info/2009/12/08/home-roasting-your-malts/
For Crystal/Caramel Malt soak 1-2 lbs of pale 2 row in just enough water to cover plus about an inch (make sure you use distilled, filtered tap, or spring water). Let soak for a few hours, but no less than 2 hours and no more than 24, I soak for 3 hours. Then Put grains into a pan and keep grains about 2″ deep then place into a preheated 180 degree oven (make sure you have a probe thermometer in the oven and not to let the temps inside the stewing grain to go above 160. If they do reduce your ovens temperature) for 1 1/2 hours. Then spread out grain into 2 separate pans and make sure the grains are no more than 1″ deep. Then increase temperature in over to 250 and let bake for 2 hours or until dry. Then if desired remove from oven for light crystal, or use the roasting guide above to create your own darker versions of crystal malt. Personally I like the 350 degrees for 45 minutes for a sweet roasty crystal malt. Experiment with 1lb batches and see what you like. I find that 1.5lbs is perfect, 2lbs seems to take way to long to dry.