Hello, this is the first time I have problems with my draught system. My ipa comes out in foam, the beer lines are full of bubbles. At first, I suspected a dirty beer line so I cleaned it with a commercial beer line cleaner for a couple of hours. I still have bubbles in my line.
I haven't touched the fridge temperature nor the regulator, which is set a at 15 psi. The first few seconds of pouring is perfect then bubbles start appearing in the line and foam comes out. Any ideas ?
I've never had this problem before. Should I increase my regulator pressure or back it a little bit ?
I haven't touched the fridge temperature nor the regulator, which is set a at 15 psi. The first few seconds of pouring is perfect then bubbles start appearing in the line and foam comes out. Any ideas ?
I've never had this problem before. Should I increase my regulator pressure or back it a little bit ?