• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

North Carolina Charlotte area - selling everything (keezer, kegerator, e-panel, etc)

Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bignick270

Active Member
Joined
Jan 5, 2015
Messages
38
Reaction score
1
Location
Lincolnton
As many of these posts start off, I am selling my gear after a long period of not brewing and shifting interests.

All items need to be local purchases unless otherwise noted.

I am located north west of Charlotte, near Lake Norman, between Denver and Lincolnton, about 20 minutes from Mooresville / 30 minutes from Huntersville.

Items 1 - 9 in a complete lot (preferred): $800 (~13% savings), or best offer

Item 1
Grain Mill & Cabinet
  • Includes drill & cabinet.
  • Enough space inside for a 7 Gallon bucket
  • The mill has probably been used < 20 times
  • Brand: Cereal Killer Grain Mill, Adventures in Homebrewing
  • $40

Item 2
3x 5 Gallon Pin Lock Keys
  • Includes set of barbed gas and liquid disconnects
  • One was used as a fermenter and has a few inches removed from dip tub.
  • $20 (all three)

Item 3
50’ ½” Stainless Steel Chiller
$40


Item 4

Pump
  • Brand: Chugger Pump. CPSS-Cl-1
  • Used about <5 batches
  • $75
    • Could be shipped

Item 5

120V / 20A (single phase) E-Brew controller with modified 40Q kettle
  • Auber Instruments SYL-2352 (SSR)
  • Current Display (Auber Instruments)
  • Heatsink (Auber Instruments)
  • Indicators, switches, disconnects (Auber Instruments)
  • Used about <5 batches (The PID controller is pretty well dialed in for my small batch brewing)
  • For Free: Brew kettle
  • ** Note I am not an electrician so I cannot guarantee or warranty the wiring in the panel but it has worked fine.
  • The front label is just an adhesive vinyl label so it can be removed.
  • $100

Item 6
Kegerator
  • Single tower, Insignia Brand
  • Barely used
  • Age: 2.5 years. Used it when living in an apartment but stopped using when I moved and had room for my Keezer. Recently used it as a conditioning chamber for lagers.
  • Includes:
    • 5lb Aluminum C02 tank
    • Regulator
    • Original tower
    • Original quick connect for commercial kegs
    • Custom pipe tower (seen in the picture)
    • ** Will need C02 and beverage lines ran.
  • $250

Item 7

5 Cubic Foot Deep Freezer, used as Fermenting Chamber
  • Brand: Idylis
  • Age: ~3.5 to 4 Years
  • Includes:
    • BrewPi controller (Older design with Arduino and Raspbery Pi) with 2 1-wire temperature sensors
    • For Free: small ceramic heater
    • (Small hole placed through lid insulation for sensors. It could be filled with foam and used as a deep freezer again)
  • $60

Item 8

Keezer
  • 7.1 cubic foot deep freezer
  • Brand: Idylis
  • Age: ~3.5 to 4 Years
  • Includes
    • Three tap positions with stainless steel Perlick taps (only 2 are installed but the third tap and shank is available)
    • 3-way C02 distribution manifold
    • Steel 5 lb C02 tank (date stamp is 2015)
    • Drip tray
    • Simple fan that runs when Freezer runs
    • Eva-Dry Dehumidifier (plug into AC to recharge)
    • STC-1000 temperature controller
    • ***tap handles in the picture are not included
    • C02 lines ran with MFL connections
    • Beverage lines need to be ran (two are included with MFL connectors but are old)
    • Does NOT include C02 regulator
  • Fits 3 5G Pin lock kegs. Not sure if 3 Ball lock kegs fit. This freezer maybe in the sticky on this site.
  • The Keezer is on a platform with caster wheels but it has limited mobility as the wheels are a little undersized.
  • $250


Item 9

3 Gallon Mini Brew Bucket
  • Never used
  • Lid modified for low pressure transfer and thermowell
  • $80

Miscellaneous (Can be shipped )
Sugar Creek Tap Handle
$15

Southern Tier Tap Handle
$15

Fortnight Tap Handle (x2)
$10 each

Boulevard Tap Handle
$15

Big Boss brewing Tap Handle (x2) (the ones with black chalk paint inside)
$5 each

Rogue Pumpkin Patch Tap Handle
$10

All tap handles: $80



Books (Can be shipped) - SOLD

Experimental Homebrewing
https://www.amazon.com/Experimental-Homebrewing-Science-Pursuit-Great/dp/0760345384
$10


Brewing Classic Styles
https://www.amazon.com/Brewing-Classic-Styles-Winning-Recipes-ebook/dp/B002C1AJX8
$5


The complete joy of Homebrewing
https://www.amazon.com/Complete-Joy...+of+Homebrewing&qid=1554136875&s=books&sr=1-1
$5


Make some Beer
https://www.amazon.com/Make-Some-Be...me+beer&qid=1554136847&s=books&sr=1-1-catcorr
$5


The Everything Homebrewing book
https://www.amazon.com/Everything-H...omebrewing+book&qid=1554136815&s=books&sr=1-1
$2

All books: $25
 
Last edited:
I’d be interested in the books shipped to 48117, please.
 
I'm interested in the grain mill. Can arrange to pick-up over the coming week. I'm down in Fort Mill
 
If there is no local interest and you end up willing to ship the control panel and kettle I’d be interested in a shipping quote (don’t think it would be too bad if the panel can fit inside the kettle) thanks!
 
Last edited:
Nice prices - I need to make a station like that for my cereal killer!

Item 5 looks interesting for eBIAB. I'm looking to move from propane to 240V eBIAB, but this is tempting. I assume I'd need another heatstick on a separate outlet. Hopefully someone buys it soon and makes my decision for me.
 
Nice prices - I need to make a station like that for my cereal killer!

Item 5 looks interesting for eBIAB. I'm looking to move from propane to 240V eBIAB, but this is tempting. I assume I'd need another heatstick on a separate outlet. Hopefully someone buys it soon and makes my decision for me.

My setup worked well for a eBIAB setup for 2.5G batches which i think was around 4G to 4.2G preboil. For a larger batch you would need more power.
 
Back
Top