jcs401
Well-Known Member
- Joined
- Mar 18, 2013
- Messages
- 649
- Reaction score
- 7
I have currently a 2000 watt electric BIAB system I made using a pid with relay and my chigger pump to recirculate the mash. It's currently wired with 20amp cord which is I believe 12/3 I got by the foot from Home Depot. I am trying to figure out since I moved what would I need to do to go up to 240v using my dryer outlet 30amp that is t being used because I now have a gas dryer.
Can I just buy a 240 extension cord to run it from the dryer outlet to the garage where I brew and and swap the 20amp plug on pid control and all wire to a 220 10/3 along with the cable coming from my element to 10/3?? What else am I missing if any? Trying to go up in element size but not spend a fortune doing so if possible
Can I just buy a 240 extension cord to run it from the dryer outlet to the garage where I brew and and swap the 20amp plug on pid control and all wire to a 220 10/3 along with the cable coming from my element to 10/3?? What else am I missing if any? Trying to go up in element size but not spend a fortune doing so if possible