B bgough Well-Known Member Joined Feb 11, 2009 Messages 304 Reaction score 2 Location San Luis Obispo, CA May 7, 2009 #1 I found a killer deal on a beer tower for my kegerator and I was wondering if there is enough room inside a 3" single spout tower to drill a hole and add a second spout
I found a killer deal on a beer tower for my kegerator and I was wondering if there is enough room inside a 3" single spout tower to drill a hole and add a second spout
newkarian Well-Known Member Joined Apr 13, 2008 Messages 186 Reaction score 1 Location Pensacola May 7, 2009 #2 check this out https://www.homebrewtalk.com/f16/dual-tap-shank-new-turns-1-into-2-taps-117879/
luvmy40 Well-Known Member Joined Oct 16, 2008 Messages 114 Reaction score 0 Location Youngstown, OH May 7, 2009 #3 If nothing else, you could stagger the second tap an inch or so to make room for the nut and elbow.
Arkador Well-Known Member Joined Apr 16, 2009 Messages 1,700 Reaction score 20 Location Fort Worth, TX May 8, 2009 #4 http://www.beveragefactory.com/draftbeer/faucets/shanks/BE-DF2-3.shtml
MSUConrad Well-Known Member Joined Sep 21, 2008 Messages 193 Reaction score 1 Location Portland, OR May 8, 2009 #5 I changed mine to 3 taps. I just dropped the second two just under the first and off to the sides. It's a tight fit, but looks nice.
I changed mine to 3 taps. I just dropped the second two just under the first and off to the sides. It's a tight fit, but looks nice.