Bigdaddyale
Well-Known Member
Try 192.168.4.1
This is the page you are looking for. I had the same problem but can't remember how I fixed it. I had to go on my routers and search for the esp8266 url.
I think there is a different procedure for versions of BPL after 3.0. https://github.com/vitotai/BrewPiLess/wiki/WiFi-setup-after-v3.1I've tried bunch of urls but none of them works
Maybe I'm missing something, what is the entire process to make it work?
1. i new brand new d1 mini board, nothing connected to it other then usb cable to my pc
2. i flashed the BrewPiLess.v3.3r1.bin file
3. anything else i need to do now?
at this step, i can connect to wifi, but cannot open config page that Bigdaddyale showed
Yes. It's a bug. Please upgrade to 3.3r1Is this a bug? I cannot change the LCD off timer...
Gets me this error.
Error at saving information. So.my LCD is always on..
I guess my main concern is what is this version lacking compared to the full rpi + arduino?
Yeah I'm aware it lacks a rpi. I was meaning more of what features does it lacks compared to the traditional brewpi. I checked out the GitHub and understand it more, I didn't see a hardware list on there though, is there an updated hardware list in this thread somewhere?First of all, this solution lacks a RPI.
For other questions, you might find answers here:
https://github.com/vitotai/BrewPiLess/wiki
Yeah I'm aware it lacks a rpi. I was meaning more of what features does it lacks compared to the traditional brewpi. I checked out the GitHub and understand it more, I didn't see a hardware list on there though, is there an updated hardware list in this thread somewhere?
Unless something significant has changed, it has to be the home network. The AP is only for configuration.Hey, is it better to connect ispindel to bpl via bpl AP or the home network? Is it any bigger stress for esp to run station+AP?
Hey, is it better to connect ispindel to bpl via bpl AP or the home network? Is it any bigger stress for esp to run station+AP?
Is there a way to modify BrewPiSetting.maxDegree that is inside the gziped HTM?
When doing lactic fermentation temps above 30 are used some times.
Also what to get down to 0C.
That depends on your network configuration.
I've used AP+STA mode since beginning. I setup iSpindle to connect to the AP BPL creates. It worked pretty well until I updated my iSpindel to latest 6.0.x. I have no idea why iSpindel just didn't report after power recycle. It DID report after configuration of network, but it didn't after powered off and on again. I then backed to 5.2.0 that had worked well for me.
Oh this is weird, what could they change? It should report in the same manner. Point is that in the fridge I have quite low network wifi gain and esp being very close has more gain so I thought I will use that. Well, I will test if mine setup will work or will behave like you wrote. Did you asked someone at ispindel what has been changed in "reporting" ?
for BPL?MQTT remote control and pressure transducer support
yeah.for BPL?
green is beer temp,
red is beer set,
yellow is Aux Temp, which is the temperature of iSpindel.
Hi, brand new to BPL but very excited to get started. I'm a bit worried though... I bought brand new Sonoff TH10's to run BPL on, but when I flash them with BPL, they just brick. I read in the notes that BPL is not compatible with new Sonoff ESP8285.... Not sure why that is, does anyone know? I have managed to flash Espurna on them no problem.
board_build.flash_mode = dout
Wow... You smashed it, mate. I downloaded the new sonoffota you posted and flashed it and now I have joined your brewpiless army. Totally astonished at that kind of level of support. Really appreciate it.You might need to set flash mode by adding the following line in PlatformIO.ini
Code:board_build.flash_mode = dout
It seems after sometime mourned 2017, the newer SONOFF changed to use ESP8285, and only dout mode is supported.
Update:
It seems there is another option "board_flash_mode". I am not sure which one is good but just built images with both set. You might try getting them on GitHub.
That depends on your network configuration.
I've used AP+STA mode since beginning. I setup iSpindle to connect to the AP BPL creates. It worked pretty well until I updated my iSpindel to latest 6.0.x. I have no idea why iSpindel just didn't report after power recycle. It DID report after configuration of network, but it didn't after powered off and on again. I then backed to 5.2.0 that had worked well for me.
Just to confirm, latest BPL and latest firmware on iSpindel and it works in AP+Station mode, reporting.
still rock solid hereI verified again. It worked for two hours and then stop. Reporting to ubidots.com did last over night. weird.
Wonder if some have compiled (v3.4r1) OLED version with newui, or perhaps point me to what to change before compiling. English version.
https://github.com/vitotai/BrewPiLess/tree/master/bins
[env:nodemcuv2-newui]
platform = espressif8266@~1.8.0
board = d1_mini
framework = arduino
lib_extra_dirs = ./lib_async
build_flags = -Wl,-Tesp8266.flash.4m2m.ld -DOLED_LCD=true
-DUseNewFrontEnd=true
monitor_speed = 115200
lib_deps = ${common_env_data.lib_deps_external}
[platformio]
env_default = nodemcu2-newui
Great. Thank you! For future reference. UseAdd "OLED_LCD=true" in "build_flags".
Code:[env:nodemcuv2-newui] platform = espressif8266@~1.8.0 board = d1_mini framework = arduino lib_extra_dirs = ./lib_async build_flags = -Wl,-Tesp8266.flash.4m2m.ld -DOLED_LCD=true -DUseNewFrontEnd=true monitor_speed = 115200 lib_deps = ${common_env_data.lib_deps_external}
You will need to change the build target. The binary file will be ".pioenv/nodemcu2-newui/firmware.bin"
Code:[platformio] env_default = nodemcu2-newui
env_default = nodemcuv2-newui
env_default = nodemcu2-newui
mine? You mean just simple log or there is any function to save general system log?I will need your log file for analysis.
mine? You mean just simple log or there is any function to save general system log?
Here it is, I was not able to donwload it from file manager, I could see them but not download, only upload.
Can you write your inside about my previous post EDIT2 and EDIT3 especially? I am interested in those
EDIT2: ALso with newUI there is no "now" button in beer profile so everytime you need to change a date from 1970 to current one. Is it possible to add that button back?
EDIT3: about iSpindel wifi strength, from 5.8.0 iSpindel is transmiting RSSI strength so maybe you can also add that information somewhere? I like the RSSI of BPL itself, it is useful, maybe similar can be added for connected iSpindel?
I think there was something wrong about the "time". It seems like the correct time is not available on reset.
I will add some error checking code to cover it.
They surely can be done. However, I am not good at web design and afraid of making the interface uglier.
EDIT2: ALso with newUI there is no "now" button in beer profile so everytime you need to change a date from 1970 to current one. Is it possible to add that button back?
Great Vito! You're the best!The "Now" button and WiFi signal of iSpindel are available in the upcoming v3.5, which is currently under test. Well, my limited verification.
It's on another branch. You can try if you can build it in PlatformIO.
https://github.com/vitotai/BrewPiLess/tree/v35pre
Enter your email address to join: