I am in the process of building a professional keg washer and would really like to automate it. It will consist of 10 solenoid valves and 2 pumps. The heating element will be controlled separately by a PID. I would like to use Click by KOYO and a CMore screen, however I am not familiar with the logic in anyway. My question is would Brewtroller or BCS be able to control 10 valves and 2 pumps in a time sequence? Pumps are 208v 1p and the valves can be either DC or AC.
My goal is to have the controller have 3 operations: 1. Fill 2 reservoirs, 2. Run a cleaning cycle, 3. Empty 2 reservoirs. I can figure out how to empty and fill the reservoirs if another controller can run the clean cycle easier.
Any input would be greatly appreciated. Thank you.
My goal is to have the controller have 3 operations: 1. Fill 2 reservoirs, 2. Run a cleaning cycle, 3. Empty 2 reservoirs. I can figure out how to empty and fill the reservoirs if another controller can run the clean cycle easier.
Any input would be greatly appreciated. Thank you.