Briz34
Active Member
- Joined
- Jul 25, 2013
- Messages
- 37
- Reaction score
- 1
Howdy! Was hoping to get some help identifying this part so I can get replacement gaskets for it.
I have a dual tap tower purchased 10+ yrs ago - beer tap shanks have what appears to be a male NPT connection. The tail piece is brass and has nut that can be removed from the fitting/tube is fared open and a 90 deg barb hose tail fitting. I'm having the hardest time finding this part let alone a gasket for it. Fits 3/16" beer line. If you can see in the picture the gasket is still on the face of the fitting (this is what I'm trying to replace).
I removed the shank nut that secures the shank to the tower and confirmed it's one piece. All the other tail pieces I've been able to search for either connection to a smooth shank end or has a bushing then 90 deg tail placed inside of it.
If any more information is needed I can provide thanks!
I have a dual tap tower purchased 10+ yrs ago - beer tap shanks have what appears to be a male NPT connection. The tail piece is brass and has nut that can be removed from the fitting/tube is fared open and a 90 deg barb hose tail fitting. I'm having the hardest time finding this part let alone a gasket for it. Fits 3/16" beer line. If you can see in the picture the gasket is still on the face of the fitting (this is what I'm trying to replace).
I removed the shank nut that secures the shank to the tower and confirmed it's one piece. All the other tail pieces I've been able to search for either connection to a smooth shank end or has a bushing then 90 deg tail placed inside of it.
If any more information is needed I can provide thanks!