rgauthier20420
Well-Known Member
- Joined
- Sep 20, 2012
- Messages
- 771
- Reaction score
- 70
So, I've got the panel all wired up and it powers on and all. Something I'm damn excited about let me add. Last night I went and wired up the temp probe and the read out is a little funny. I'll list what I'm running so it's known. I've got the MYPIN TA4-SSR with a K type thermocouple from Auber. I read through the Auber website and found that they've noted yellow is positive and red is negative for the US market. The yellow is wired to 8 (+) and the red is wired to 7 (-).
From what I can tell from the diagram, the wiring for a thermocouple is just connecting 7 & 8. So that's how it's wired up (you can see the white wire with the yellow terminals).
Now for what's it's doing. All it does it start out around 65 degrees and slowly creep up. I mean slowly as in it twitches between 65.4 and 65.5 then lands on 65.5 and continues to do that upwards. It doesn't react at all when put in liquid of any differing temperatures.
Here's a picture of the wiring. Now, is the wiring right or do I need to get a whole new PID or TC?
From what I can tell from the diagram, the wiring for a thermocouple is just connecting 7 & 8. So that's how it's wired up (you can see the white wire with the yellow terminals).
Now for what's it's doing. All it does it start out around 65 degrees and slowly creep up. I mean slowly as in it twitches between 65.4 and 65.5 then lands on 65.5 and continues to do that upwards. It doesn't react at all when put in liquid of any differing temperatures.
Here's a picture of the wiring. Now, is the wiring right or do I need to get a whole new PID or TC?