Adding a third keg.

[carl_g]

I am looking for the best solution for adding third keg into the loop of my system. I currently have a dual body regulator. As of now this allows me to force carb one keg(when needed) while I can serve the other. I want to split one of the lines so it can serve 2 kegs while still maintaining the flexibility of force carbing at a different pressure on the other reg body.

Do I simply put in a Tee on the one line or should I use a small manifod? What's the best way? The Tee is cheaper but there is only one ball valve at the body of the regulator. Any help would be appreciated.
Thanks,
Carl

 

[Hammy71]

A tee will work fine. The nice thing about a manifold is the ability to turn the gas off. With a tee you have to trust the ball valve connectors not to leak when not connected to the keg.

 

[TomSD]

If you're just adding one more a T or Y should be fine... no need for a manifold for that.

 

[carl_g]

Cool!
Thanks guys, I was hoping that would be the case..