9.2 Gallon Hot Liquor Tank by Stout with Thermowell, Raised HERMS Coil, Sight Glass, One Element Port and Recirculation Fitting
Sanitary 3/4" ball valve (5/8" ID)
1.5" Tri-Clamps with gaskets
(4) Sanitary 1/2" Hose Barbs
(1) 1" NSP Adapter
Welded-in 3" Thermowell with 1/2" NPT fitting
Sanitary Sight Glass
Upper recirculation fitting
Diameter = 12.5"; Height = 20"; Steel Gauge = 1.2mm
(reckless use of commas and bad sentence structure ahead)
What's up! I'm getting rid of this HLT. It has held water exactly one time just to make sure everything was in order. Since then I've upgrade a bit and it's been sitting on my bottom shelf for about 7 months. Stout makes these for 603 + Shipping.
Everything above is included. I will also included a stainless steel liquid tight RTD temperature sensor with NPT (tapered) thread (6ft), and 5500W Heating element, both pre-assembled by the guys over at theelectricbrewery.com (Thanks kal!). Which can be seen, still in there packing material, in the photos. Total cost for these items is $260.
For a grand total of $863 + Shipping in items.
I'm asking $500 + Shipping (Local Pickup is Free - Upper Michigan) for the whole shebang. For what is essentially brand new equipment.
*Note, I will knock off 50 or so dollars if you decide you don't want the heating element or temp sensor.
Sanitary 3/4" ball valve (5/8" ID)
1.5" Tri-Clamps with gaskets
(4) Sanitary 1/2" Hose Barbs
(1) 1" NSP Adapter
Welded-in 3" Thermowell with 1/2" NPT fitting
Sanitary Sight Glass
Upper recirculation fitting
Diameter = 12.5"; Height = 20"; Steel Gauge = 1.2mm
(reckless use of commas and bad sentence structure ahead)
What's up! I'm getting rid of this HLT. It has held water exactly one time just to make sure everything was in order. Since then I've upgrade a bit and it's been sitting on my bottom shelf for about 7 months. Stout makes these for 603 + Shipping.
Everything above is included. I will also included a stainless steel liquid tight RTD temperature sensor with NPT (tapered) thread (6ft), and 5500W Heating element, both pre-assembled by the guys over at theelectricbrewery.com (Thanks kal!). Which can be seen, still in there packing material, in the photos. Total cost for these items is $260.
For a grand total of $863 + Shipping in items.
I'm asking $500 + Shipping (Local Pickup is Free - Upper Michigan) for the whole shebang. For what is essentially brand new equipment.
*Note, I will knock off 50 or so dollars if you decide you don't want the heating element or temp sensor.
Last edited: