paul_111
Well-Known Member
Hi All...
I started working out the details of the schematic of my eBIAB controller. I have used some bits from a PJ schematic or two among others.
It will use 2 120V, 20A input lines to control 2 2000W elements. There will be:
2 Auber SYL-2353
JSL-73B timer
E-stop
2 buzzers
2 illuminated selectors to power the elements
2 pumps
etc
I think I have sorted out the PID-SSR-switch-contactor bit, but before I go much further, can someone please give it a once-over to see if I have that portion correct?
Thanks!
I started working out the details of the schematic of my eBIAB controller. I have used some bits from a PJ schematic or two among others.
It will use 2 120V, 20A input lines to control 2 2000W elements. There will be:
2 Auber SYL-2353
JSL-73B timer
E-stop
2 buzzers
2 illuminated selectors to power the elements
2 pumps
etc
I think I have sorted out the PID-SSR-switch-contactor bit, but before I go much further, can someone please give it a once-over to see if I have that portion correct?
Thanks!