BrewHokieTJ
New Member
I have been lurking here for a while so I figured it was time to finally start contributing; I’ll start by sharing my brew-magic style build.
Disclaimer: The extruded aluminum and much of the stainless steel were obtained by rescuing them from being scrapped. I was able to modify the frame and re-purpose it into a brew stand, obviously this would not have been the cheapest solution … but you work with what you have and this also allows me to make changes as I go. Oh and I am only building this indoors I will not be firing propane in my basement.
I have not yet had the chance to brew with this since I have to add a few more key elements like some expanded metal mesh to support the kegs. I also hope to add locking casters at some point! On to the pictures:
Midway through the layout/concept phase:
Further Along:
This one should generate some questions!
Need to add exp. metal mesh here
hope the pics work.. I am trying to link to picasa but the pics are public and shared.
more pics to come!
Thanks!
Disclaimer: The extruded aluminum and much of the stainless steel were obtained by rescuing them from being scrapped. I was able to modify the frame and re-purpose it into a brew stand, obviously this would not have been the cheapest solution … but you work with what you have and this also allows me to make changes as I go. Oh and I am only building this indoors I will not be firing propane in my basement.
I have not yet had the chance to brew with this since I have to add a few more key elements like some expanded metal mesh to support the kegs. I also hope to add locking casters at some point! On to the pictures:
Midway through the layout/concept phase:
Further Along:
This one should generate some questions!
Need to add exp. metal mesh here
hope the pics work.. I am trying to link to picasa but the pics are public and shared.
more pics to come!
Thanks!