Myrdhyn
Well-Known Member
So, my first batch of beer was finally ready to keg yesterday. I took the afternoon off class (ok I skipped my PHP class) and got my keggerator built. Sorry for the crappy pictures, but I couldn't find any batteries for my camera, so I used my cellphone. Well, on to the beer porn.
I used the Frigidaire from Lowes that so many people have been curious about:
And a bunch of other stuff:
First I removed the door, measured like four times, and then drilled two 7/8" holes:
Next I took two small pieces of wood(ok I hacked up a WAY too small cutting board) to spread the load on the plastic and cut a 7/8" hole in each one, and threaded the faucet shanks through the door and each piece of wood. Then I tightened everything down:
I used the Frigidaire from Lowes that so many people have been curious about:
And a bunch of other stuff:
First I removed the door, measured like four times, and then drilled two 7/8" holes:
Next I took two small pieces of wood(ok I hacked up a WAY too small cutting board) to spread the load on the plastic and cut a 7/8" hole in each one, and threaded the faucet shanks through the door and each piece of wood. Then I tightened everything down: