I need some help on my Rims project. I have a Love TSS2-2100, do I need a SSR and Heatsink ? If so, which kind? And does anyone have a wiring diagram that is simple to follow? I check Rims for dummies and couldn't find what I needed.
I do appreciate this comment and like to keep everyone safe as well, but not knowing what a PID and SSR are doesn't mean he doesn't have electrical knowledge. I imagine a guy could spend his whole life wiring houses and working both with 240 and 120 and never run into a PID or SSR.No disrespect intended here, but if you can't follow Sawdustguy's schematics you should not be building one of these. You are dealing with 10+ amps of AC current around water. Unless you have a pretty good sense of how it works you stand a higher chance than you should be comfortable with of death by electric beer.
You will of course need an SSR if you want your love controller to be controlling anything. It's part number 10 on Sawdustguy's first post. Sorry dude, don't mean to be negative, but this is an intermediate DIY project with moderate safety considerations necessary. If you don't understand what an SSR is, you aren't at this particular time equipped to make those safety considerations.
I think your best options are to hire someone to build something for you or to get down and dirty with some reading.
I do appreciate this comment and like to keep everyone safe as well, but not knowing what a PID and SSR are doesn't mean he doesn't have electrical knowledge. I imagine a guy could spend his whole life wiring houses and working both with 240 and 120 and never run into a PID or SSR.
Thanks for the tips. I plan on having paying someone to build it for me so I can live a long drunk life.... I just want to have all of the parts and plans to give to him. I figured that I would ask you guys and get the answers so I don't have that deer in the headlights look when the sparky ask me a question about the parts
Thanks again
Enter your email address to join: