dutch-brew
Well-Known Member
Have the e-keggle up and running now for a while, but was wanting to be able to take my supply cord off to make my electrical toolbox more mobile. I have one of those GFCI cords off ebay on it, and it's very stiff.
question is, will these connectors i found on ebay work for me.
http://cgi.ebay.com/L14-30-30A-Plug...001?pt=LH_DefaultDomain_0&hash=item19bb90c751
I am running a 5500W element, meaning the 30 amp connectors will work. When measuring my actual voltage though, i read slightly over 125 V, so more than 250V on my wires.
Could anyone ring in on this? Will i need to go for the 480V connectors instead?
thanks,
Fred
question is, will these connectors i found on ebay work for me.
http://cgi.ebay.com/L14-30-30A-Plug...001?pt=LH_DefaultDomain_0&hash=item19bb90c751
I am running a 5500W element, meaning the 30 amp connectors will work. When measuring my actual voltage though, i read slightly over 125 V, so more than 250V on my wires.
Could anyone ring in on this? Will i need to go for the 480V connectors instead?
thanks,
Fred