Igorstien
Well-Known Member
So yesterday I got my keg system all setup. I can only put on soda keg in the bar fridge right now....little steps people...little steps.
So I want a 2.6-2.8 volumes......So I get the temperature of the Fridge which is 40 F...and I get the chart, and find I need to set the regulator to 13psi...PERFECT.
Last night I put everything...CO2, regulator, Keg....Everything in the Fridge..and set the PSI to 13.....Yes I opened the main valve.
This morning I came down to check everything and the Keg gauge is reading 2psi. ....HMMMMM???? Anyway I turn the gauge back up to 13, and heard the gas feeding into the keg....I will keep and eye on it.
I have a 5lbs tank and doulbe gauge regulator, 1/4 inch tube from the CO2 to the keg and 7 feet of 3/16 inch line to the tap...I tested the tap and it flows nicely!!
Any thoughts?? I figured it may have something to do with the cold etc......
So I want a 2.6-2.8 volumes......So I get the temperature of the Fridge which is 40 F...and I get the chart, and find I need to set the regulator to 13psi...PERFECT.
Last night I put everything...CO2, regulator, Keg....Everything in the Fridge..and set the PSI to 13.....Yes I opened the main valve.
This morning I came down to check everything and the Keg gauge is reading 2psi. ....HMMMMM???? Anyway I turn the gauge back up to 13, and heard the gas feeding into the keg....I will keep and eye on it.
I have a 5lbs tank and doulbe gauge regulator, 1/4 inch tube from the CO2 to the keg and 7 feet of 3/16 inch line to the tap...I tested the tap and it flows nicely!!
Any thoughts?? I figured it may have something to do with the cold etc......