Size of Shanks?

CornyKegs 728
Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum

Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
R

Rudeboy

Well-Known Member
Joined
Jul 19, 2007
Messages
263
Reaction score
5
Location
Edmonton, Alberta
I have a chest freezer that I use as a Lagering Chest and for draft beer. I'm just using picnic taps at the moment. I got a bar fridge that I'm converting and putting a DIY PVC tower on it. So for new stuff I'll need.

Two Faucets
Two Handles
Two Shanks

Anything else?
And what size of shanks do I need?

Thanks

Rudeboy
 
Depends on how thick the wall of your fridge is. You cann't go to long but the extra will stick out on the inside.
 
sause said:
If your not going with the tailpieces welded on you will need two rubber washers tailpieces and beer nuts like these at the bottom of the page.
Click to expand...

Nope no welding.

So I need the hoses (which I already have) which go in the:

Tail Piece which is held on by a,
Wing nut with a,
Rubber Washer (or two for each?) and the Tail Piece connects with the,
Shank, which connects to the,
Faucet.

Tail piece, wing nut, rubber washers, shank, and faucet. Anything else?

4"? 3"? Shanks?

Thanks
Rudeboy
 

Similar threads

jwhazel
Are intertap shanks supposed to have this o-ring?
Replies
1
Views
1K
Bobby_M
Bobby_M
K
Trouble with DuoTight system
Replies
7
Views
1K
noahbanks
N
Brushwood Brewing
Sold Sankey Keg, Faucets, Shanks, Tap Handles, etc. (NJ)
Replies
7
Views
754
beren
beren
R
Ohio For Sale Columbus Area
Replies
4
Views
453
reeftankin
R
Classywolf
Inwall tap system
Replies
2
Views
312
day_trippr
day_trippr
Williams Brewing 300

Latest posts

Back
Top