codeman021
Member
ok so my beers are not carbing enough .So I have been reading up on this for a week or so now, I have tired a few different things to help, but nothing is. Let me tell you about my system.
5' beer lines- that's what keg connection sent me, No fom issues.
I tried the set it and forget it method at 12psi around 35 degrees.
I then tried 30 psi for a week, it helped but not enough the beer still seemed flat.
I leak tested my connections with star san and found no bubbles or leaks, plus the co2 has been on constantly for a month now, with no change in pressure.
Am I missing anything, any advice would be appreciated, thanks in advance.
5' beer lines- that's what keg connection sent me, No fom issues.
I tried the set it and forget it method at 12psi around 35 degrees.
I then tried 30 psi for a week, it helped but not enough the beer still seemed flat.
I leak tested my connections with star san and found no bubbles or leaks, plus the co2 has been on constantly for a month now, with no change in pressure.
Am I missing anything, any advice would be appreciated, thanks in advance.