dyqik
Well-Known Member
Dropped my little tan pump (into sanitizer) on Monday, and broke off the two mounting tabs. It carried on working fine though. I guess I need to find a U shaped clamp to clamp it to the piece of wood I attached it and the switch to.
I think I might also be looking for a more powerful pump, as my cooling rate by recirculating through the kettle and CFC chiller is massively limited by the flow rate of the pump - the output cooling water is barely warm, even with the water flow set to about 1/4 of maximum. I guess a Chugger or March is the safe option here. I'd keep the little tan pump as a potential RIMS pump though.
I think I might also be looking for a more powerful pump, as my cooling rate by recirculating through the kettle and CFC chiller is massively limited by the flow rate of the pump - the output cooling water is barely warm, even with the water flow set to about 1/4 of maximum. I guess a Chugger or March is the safe option here. I'd keep the little tan pump as a potential RIMS pump though.