Junkster
Well-Known Member
BIAB stand. First batch should be in a couple weeks. I need to empty some kegs and fermenters first. Sold the Brutus and went "simple"
Nice setup! Me too - sold the 3 tier rig and going to modified BIAB (Electric).
BIAB stand. First batch should be in a couple weeks. I need to empty some kegs and fermenters first. Sold the Brutus and went "simple"
howd you get a grant for tha rig ?
skeaterbait said:I need a grant so I can build a rig.
MangledMash said:Mangled Mash
MangledMash said:Thanks. If you go this route, plan on accounting for the loss of water in the plumbing. I lose about 1.5 gallons in the whole system. Not necessarily a problem because it is just water, but you don't want to come up short in your boil.
4xtreme said:Some one wonted a picture of my rims set up here it is
<img src="https://www.homebrewtalk.com/attachment.php?attachmentid=52544"/>
A man of few words...
My eBIAB set up:
I started thinking about brew stands after looking at all these beauties! I decided this was something I was going to build myself and to start off with I wanted to build a 3 tier gravity fed system. Here it is!
homebeerbrewer said:Dude, that thing will support a truck. Mine only uses 2x4s for the uprights, and it's sturdy as it is.
As a side note, you might want to get some heat shielding under the burners. I used aluminum diamond plate because the wood under the top burner started to turn brown. My lower burner is freestanding.
FSR402 said:Well I have taken mine apart and put back together 3 times now. I posted the original setup here so I figured I would post the newest setup.
Here it is setup for the brew day yesterday.
30 gal HLT, 55 gal MLT, and 55 gal Kettle.
In front of it is my brewhemoth (22 gal) and my 35 gal conicals ready to be filled.
Well I have taken mine apart and put back together 3 times now. I posted the original setup here so I figured I would post the newest setup.
Here it is setup for the brew day yesterday.
30 gal HLT, 55 gal MLT, and 55 gal Kettle.
In front of it is my brewhemoth (22 gal) and my 35 gal conicals ready to be filled.
JoshuaWhite5522 said:very nice, it that a SS Drum you are using for MLT and BK? what are you using to heat them?
Enter your email address to join: