Portable Kegerator is underway...
Well, the anniversary party is 3 1/2 weeks away and I'm on the hook to bring and serve up three kegs of beer (Cream Ale, Irish Red Ale and maybe my sterling Gold).
A while back I posted this concept...wanting something better than just the usual picnic taps and cornies in an ice bucket.
![garbage_Kegger.jpg garbage_Kegger.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5109-cfdc577dcafdcf24a63cd5783dfb874b.jpg)
Well I have time to decide on exactly the model of garbage can I use
but primary to the project was putting together a good CO2 dispensing system. Rather than dismantle one of my two CO2 systems at home I figured that the Kobalt Portable CO2 system would work well, and owning a pneumatic stapler and brad nailer, I could put it to good (normal) use around the house anyway.
Anyway, here's Phase I of the Rolling Kegerator system:
The basic kit comes with one empty 9Oz bottle inside the package, and then they give one 9Oz full bottle included in the price ($84.00)
I went ahead and purchased a one pound bottle as well, knowing I'd use it one way or another.
I also picked up some fittings for the hose connection:
![Rolling_Kegger1.jpg Rolling_Kegger1.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5110-55b27567d1de6853c76ad47dc4aefd75.jpg)
Picked up a barb fitting and an additional male quick connect.
![Rolling_Kegger2.jpg Rolling_Kegger2.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5111-32b3d186c0571fd740b383c60cd14b33.jpg)
I'm not worried about different serving PSI so I just installed a splitter for three gas lines. I also installed a check valve in the main line. Note the black electrical tape around the ends. I didn't like the tightness of the fit I got when I clamped down the otikers, so I built up the thickness of the hose with about 8" of tape. The clamps have a nice solid bite now.
![Rolling_Kegger3.jpg Rolling_Kegger3.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5112-2e96398b78ba58cc549da56fc0dc2073.jpg)
Here, everything is ready to hook up. Notice the thread tape on the splitter. I actually decided against this, thinking that I would lose the "bite" of those barbs and didn't want to risk a disconnect.
![Rolling_Kegger4.jpg Rolling_Kegger4.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5113-7c17c4812ba2fd0c5a80e055382b30cb.jpg)
More to follow....
Well, the anniversary party is 3 1/2 weeks away and I'm on the hook to bring and serve up three kegs of beer (Cream Ale, Irish Red Ale and maybe my sterling Gold).
A while back I posted this concept...wanting something better than just the usual picnic taps and cornies in an ice bucket.
![garbage_Kegger.jpg garbage_Kegger.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5109-cfdc577dcafdcf24a63cd5783dfb874b.jpg)
Well I have time to decide on exactly the model of garbage can I use
Anyway, here's Phase I of the Rolling Kegerator system:
The basic kit comes with one empty 9Oz bottle inside the package, and then they give one 9Oz full bottle included in the price ($84.00)
I went ahead and purchased a one pound bottle as well, knowing I'd use it one way or another.
I also picked up some fittings for the hose connection:
![Rolling_Kegger1.jpg Rolling_Kegger1.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5110-55b27567d1de6853c76ad47dc4aefd75.jpg)
Picked up a barb fitting and an additional male quick connect.
![Rolling_Kegger2.jpg Rolling_Kegger2.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5111-32b3d186c0571fd740b383c60cd14b33.jpg)
I'm not worried about different serving PSI so I just installed a splitter for three gas lines. I also installed a check valve in the main line. Note the black electrical tape around the ends. I didn't like the tightness of the fit I got when I clamped down the otikers, so I built up the thickness of the hose with about 8" of tape. The clamps have a nice solid bite now.
![Rolling_Kegger3.jpg Rolling_Kegger3.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5112-2e96398b78ba58cc549da56fc0dc2073.jpg)
Here, everything is ready to hook up. Notice the thread tape on the splitter. I actually decided against this, thinking that I would lose the "bite" of those barbs and didn't want to risk a disconnect.
![Rolling_Kegger4.jpg Rolling_Kegger4.jpg](https://cdn.homebrewtalk.com/data/attachments/5/5113-7c17c4812ba2fd0c5a80e055382b30cb.jpg)
More to follow....