I purchased a keg recently off craigslist, the guy gave me the keg which was pressurized to show that it worked right. And he also gave me new o-rings to replace the ones on there. So I took it apart, cleaned it all, and put it back together like usual (this is my 3rd keg). And everything is great. I didn't check pressure because I assumed it worked (error on my part). And I transferred my beer into it and now it wont hold pressure.
Ive done the soapy water check, nothing. Ive made sure all the in/out pieces are on tight and even checked the top seal and it fits tight. No sounds, no bubbles on tests. I can't figure it where its leaking but its obviously because of me taking it apart and putting it back together. But im not sure what to do to check where its leaking and how to fix it. Any tips on what I can do?
Ive done the soapy water check, nothing. Ive made sure all the in/out pieces are on tight and even checked the top seal and it fits tight. No sounds, no bubbles on tests. I can't figure it where its leaking but its obviously because of me taking it apart and putting it back together. But im not sure what to do to check where its leaking and how to fix it. Any tips on what I can do?