bbarr21
Well-Known Member
Wanted to attach a drip tray to the side of my keezer with out drilling into the freezer walls and possible damaging the coils. I also wanted to be able to easily remove it so I could clean it. This is what I came up with
I gorilla glued 4" l brackets to the freezer
I used 4 2" block magnets that attached themselves to the brackets
I places the bottom part of the drip tray on top of the magnets
I cut (2) 4" lengths of metal and put them inside the tray lined up with the magnets so they would hold the tray securely to the brackets/ fridge
Then the grate on top for a functional clean look.
The drip tray is a 19 1/2" x 4"
I ordered it from barproducts.com for about $20
I gorilla glued 4" l brackets to the freezer
I used 4 2" block magnets that attached themselves to the brackets
I places the bottom part of the drip tray on top of the magnets
I cut (2) 4" lengths of metal and put them inside the tray lined up with the magnets so they would hold the tray securely to the brackets/ fridge
Then the grate on top for a functional clean look.
The drip tray is a 19 1/2" x 4"
I ordered it from barproducts.com for about $20