Ok. So I just tapped my first corny keg, and all I get is foam... and co2. The foam doesn't come out consistent, either, it sputters and stops and sputters. This isn't from the tap, but from the QD. Literally, right out of the keg, it sputters and foams. I don't know what the deal is.
Here's my setup:
5g corny ball lock
Had it set at 12 psi for a week
45F in the keezer.
10' 3/16 Bevflex, kept in the keezer, with a squeeze tap.
line, tap and qd are all brand new
Yes, the keg is assembled correctly: gray in, black out, diptube on the right side. Posts are in the right place. Pressure checked and foamy-water checked for leaks- no leaks.
The beer doesn't come out of the keg consistently, it sputters and there are definitely air bubbles coming straight out of the keg.
I've searched but most of the threads I see say "line too short" or "line too warm." My line is the same temp, and 10' is what everyone suggests. I would really like some help here. Ask me questions if you need some more information.
Here's my setup:
5g corny ball lock
Had it set at 12 psi for a week
45F in the keezer.
10' 3/16 Bevflex, kept in the keezer, with a squeeze tap.
line, tap and qd are all brand new
Yes, the keg is assembled correctly: gray in, black out, diptube on the right side. Posts are in the right place. Pressure checked and foamy-water checked for leaks- no leaks.
The beer doesn't come out of the keg consistently, it sputters and there are definitely air bubbles coming straight out of the keg.
I've searched but most of the threads I see say "line too short" or "line too warm." My line is the same temp, and 10' is what everyone suggests. I would really like some help here. Ask me questions if you need some more information.