will_rouse
Well-Known Member
- Joined
- Mar 27, 2013
- Messages
- 104
- Reaction score
- 5
Okay I have searched online and have not ran across a solution yet. I'm trying to hard wire the STC 1000 into the freezers power cord (and I have seen this https://www.homebrewtalk.com/f11/how-hard-wire-stc-1000-a-385792/ thread). I guess I'm not the best with schematics but there is a few things I'm confused on so far I'm at this point
But on the schematics I've seen so far there needs to be a jumper wire from the 1 spot( primary hot) to the 7 spot( cooling hot). My question is when I run a jumper do I leave the black part of the cord going into the freezer in with the jumper like so
I'm almost positive this is what is supposed to happen but I wanted some extra assurance before I blow every breaker in the house. Hopefully this question isn't overly mundane thanks guys!
But on the schematics I've seen so far there needs to be a jumper wire from the 1 spot( primary hot) to the 7 spot( cooling hot). My question is when I run a jumper do I leave the black part of the cord going into the freezer in with the jumper like so
I'm almost positive this is what is supposed to happen but I wanted some extra assurance before I blow every breaker in the house. Hopefully this question isn't overly mundane thanks guys!