TriangleIL
Well-Known Member
Hey all,
I need some help/advice. I have some solenoid valves that require 24VAC, requiring 22 Watts. These
Anyways, I have a 24VAC, 200VA transformer I plan to use to power these. My plan was to run the wires from the transformer, into a terminal strip, and then through each of the switches directly to the valves.
Questions, do I need to worry about over current? Should I have a fuse between the switch and the valve? If necessary, I assume the fuses should be slow-blow? Do I need to worry about the momentary amperage requirement? Should I put a capacitor in line prior to the valves? Anything else I should know?
Sorry for the noobish questions, I'm barely making my way with all this electrical stuff
I need some help/advice. I have some solenoid valves that require 24VAC, requiring 22 Watts. These
Anyways, I have a 24VAC, 200VA transformer I plan to use to power these. My plan was to run the wires from the transformer, into a terminal strip, and then through each of the switches directly to the valves.
Questions, do I need to worry about over current? Should I have a fuse between the switch and the valve? If necessary, I assume the fuses should be slow-blow? Do I need to worry about the momentary amperage requirement? Should I put a capacitor in line prior to the valves? Anything else I should know?
Sorry for the noobish questions, I'm barely making my way with all this electrical stuff