Yuri's Brew Yurt (Hut)

[Mirilis]

That definately has a huge cool factor. Setups like that are the reason I am persuing a degree in Electro-Mechanical engineering.

 

[IrregularPulse]

That is RAD!:rockin:

Even if the camera is not that useful it definatly has the cool factor going. I am really starting to think that Phase 2 of my build might have to be pc based operation. Seeing some of these threads lately is inspiring. Just need to get it complete and running first then plan for phase 2

Same problem I have. Must establish Phase 1 before I can move on to the even cooler phase 2

 

[humann_brewing]

wow, you have just stepped up to the next level in your brewery.

 

[thorongil]

What are you using to get the volume numbers?

 

[Zaphod]

Hey Yuri, what did you use for the pressure and volume sensors?

Fantastic work!

 

[Chosenwon]

And I thought I had a problem...

At least I know there is a ton of growing room from where I am now.

 

[Yuri_Rage]

The temperature sensors are K-type thermocouples from Omega. I use MAX6675 converters and the Arduino SPI library to interface with them.

The pressure sensor is an MPX4250GP, which would also be well suited for monitoring kegerator serving pressures.

The volume sensors are ultrasonic "PING)))" modules from Parallax (measuring the distance from the top of the kettle to the surface of the liquid). I may switch to pressure sensors (digital "sight tubes") like kladue and others use, but the ultrasonic method works for now.

 

[Bsquared]

too cool for school...where can I find one of those ultrasonic "Ping" detectors?

 

[Yuri_Rage]

Radio Shack, Mouser, Digikey, Google.

 

[kladue]

Yuri, what is the CPU loading when the webcam is enabled?, curious to see if it would overload the 500MHZ cpu in my panel pc.

 

[ChshreCat]

Yer mash temp is a bit low.

 

[Yuri_Rage]

My server runs a 700MHz Pentium III on a crappy old Dell laptop, and it works fine. The webcam process spikes CPU usage to 4% during updates.

Oddly enough, CshreCat, the pressure and mash temp values are the only actual sensor data (accurately reporting the slight amount of pressure I applied to the boiler and the ambient temp in the brew hut). The rest are just meaningless constants that Arduino spits out since I don't have everything completely wired yet. I've tested all of the sensors individually, but I need to do some work on the control circuit before I can tie them all together at the same time (it will likely be a printed board from Sparkfun's BatchPCB service). The rig is functional, but it's definitely a work in progress.

 

[Fingers]

The temperature sensors are K-type thermocouples from Omega. I use MAX6675 converters and the Arduino SPI library to interface with them.

Weren't you using LM35 sensors at one time? Why the switch?

 

[lincoln]

i would venture that thermocouples are available in all sorts of stainless probe configuration while the lm 35 is a bulk to92 package....

 

[Yuri_Rage]

LM34 and LM35 sensors are cheap and easy to use, but building them a waterproof casing that maintains a reasonable response time is a bit of a pain (epoxy is a great, simple solution if you're willing to wait a long time for the temp to stabilize). So, I went with grounded thermocouples. Omega will custom make a ton of different configurations for rather reasonable prices. All of mine are stainless probes brazed onto stainless NPT fittings.

I may still use LM-series sensors for other projects (like a kegerator or fermentation cabinet).

 

[Jester369]

über sweet, yuri!

 

[Fingers]

LM34 and LM35 sensors are cheap and easy to use, but building them a waterproof casing that maintains a reasonable response time is a bit of a pain (epoxy is a great, simple solution if you're willing to wait a long time for the temp to stabilize). So, I went with grounded thermocouples. Omega will custom make a ton of different configurations for rather reasonable prices. All of mine are stainless probes brazed onto stainless NPT fittings.

I may still use LM-series sensors for other projects (like a kegerator or fermentation cabinet).

I was planning on inserting them into stainless tubes and sealing the end with epoxy, as you suggest. I don't expect a long response time given the specs on the part. What sort of experience did you have?

 

[Yuri_Rage]

I used an old dip tube from a Corny keg and JB weld to seal it up. The response time was very slow from room temp to mash temps (30 seconds or so). Once it was up to temp, I'm confident that it was good for trend data, but the readings were likely a few seconds off.

 

[Fingers]

I think I can live with a response like that for now. I'll fine tune it all once it's together and working.

Any other tips you can give to a prospective Arduino brewery builder? Did you write a PID algorithm for your burners?

 

[Yuri_Rage]

I haven't messed with PID yet, but I may. There's some open source code that looks very user friendly on the Arduino site. For the moment, I'm manually running any recirculation or steam injection. I may play with PWM control of the element that heats the boil kettle later this weekend.

As far as advice:
Test everything and test again. Dive into writing code and building seemingly complex circuits. Don't be afraid of mistakes. Have mechanical fail-safes that prevent software/hardware errors from becoming dangerous. Any plan is better than no plan, but plans alone won't brew your beer - get to work!

Oh yeah, and don't take advice from anyone.

 

[user 40839]

*looks at 40qt leaky Igloo cooler mash tun, and feels inadequate*

 

[v2comp]

*looks at 40qt leaky Igloo cooler mash tun, and feels inadequate*

Understandable!:fro:

 

[kladue]

Here is the Java code I have cobbled together for a PID loop that can compensate for small and large input ranges, integral limit to control windup, and has a calculation cycle time adjustment.

public class PIDLogic implements Runnable {

private double KProportional;
private double KIntegral;
private double KDifferential;
private double IntegralLimit;
private double ProportionalGain;
private double IntegralGain;
private double DifferentialGain;
private double CycleTime;
private double Setpoint;
private double Output;
private double ErrorSum;
private double ErrorGain;
private double Error;
private double PrevError;

public PIDLogic(double kP, double kI, double kD, double lI, double Ctime, double Egain, double SP) {
setProportionalConstant(kP);
setIntegralConstant(kI);
setDifferentialConstant(kD);
setIntegralLimit(lI);
setSetpoint(SP);
setErrorGain(Egain);
setCycleTime(Ctime);


Thread P = new Thread(this);
P.setDaemon(true);
P.setPriority(5);
P.start();
}

public int CalculateGain(double PV) {
try {
Thread.sleep((int)(CycleTime*1000));
} catch (InterruptedException ie) {
}
Error = (Setpoint - PV) * ErrorGain;
ErrorSum += Error;
if (ErrorSum > (IntegralLimit / KIntegral)) {
ErrorSum = (IntegralLimit / KIntegral);
}
ProportionalGain = KProportional * Error;


IntegralGain = KIntegral * ErrorSum;
if (IntegralGain > IntegralLimit) {
IntegralGain = IntegralLimit;
}
if (IntegralGain < -IntegralLimit) {
IntegralGain = -IntegralLimit;
}
DifferentialGain = KDifferential * (PrevError - Error);
PrevError = Error;
Output = ProportionalGain + IntegralGain + DifferentialGain;
return (int) Output;
}

public double getProportionalGain() {
return ProportionalGain;
}

public double getIntegralGain() {
return IntegralGain;
}

public double getDifferentialGain() {
return DifferentialGain;
}

public double getProportionalConstant() {
return KProportional;
}

public double getIntegralConstant() {
return KIntegral;
}

public double getDifferentialConstant() {
return KDifferential;
}

public double getIntegralLimit() {
return IntegralLimit;
}

public double getSetpoint() {
return Setpoint;
}

public void setProportionalConstant(double kP) {
KProportional = kP;
}

public void setIntegralConstant(double kI) {
KIntegral = kI;
}

public void setDifferentialConstant(double kD) {
KDifferential = kD;
}

public void setIntegralLimit(double lI) {
IntegralLimit = lI;
}
public void setSetpoint(double setpoint) {
Setpoint = setpoint;
}

public void setErrorSum(double sum) {
ErrorSum = sum;
}

public void setErrorGain(double EGain) {
ErrorGain = EGain;
}
public void setCycleTime(double Ctime){
CycleTime = Ctime;
}

public void run() {
} //Main driver for threaded version.
}

 

[RockfordWhite]

I don't approve of your style of beginning variables with a capital letter...

 

[Vinic]

Here is the Java code I have cobbled together for a PID loop that can compensate for small and large input ranges, integral limit to control windup, and has a calculation cycle time adjustment.
<<snip>>

cool. I've been working on a perl version. This should help with the steep curve I'm approaching!

Thanx a bunch

 

[Yuri_Rage]

I don't approve of your style of beginning variables with a capital letter...

Ok, so it's not perfect naming convention. But that's some fine code. It's well organized, easy to decipher, and likely works well.

On a different note, my brew day is going really well. I got 100% conversion efficiency and it's looking like over 90% lauter efficiency (60 minute mash, 90 minute fly sparge). Things are working very well.

I wrote a quick and dirty PWM control routine this morning. Now I can reduce my extremely violent boil to a nice, controlled, rolling one.

 

[kladue]

Sorry if I offend with the variable naming, but this is not my line of work just what I have taught myself over the last year as a means to control the PLC hardware for my brewing system. If I had the benefit of time to attend a course on writing Java applications the code would have followed the established methods. My field is industrial and commercial instrumentation and most of my time last 5 years has been away from home managing construction projects, not writing software for a living. This is what I do to fill in nights and weekends while on the road, turning control concepts into code to achieve safe automatic unattended brewing system operation. The current code is a combination of Java and MySQL tables with integrated recipe generation and brewing sequence control, and fermentation temperature control for up to 6 fermenters.

 

[Yuri_Rage]

Another success! My apparent overall efficiency was "only" 80%, which is just fine with me. I think because I used PWM to throttle back the boil, my boil off rate was much reduced, and I got more volume than required into the fermenter. The wort tastes great, and I'm going to RDWHAHB!

 

[klyph]

Amazing. The Engineering aspects of brewing are just as interesting as the chemistry involved.

 

[Fingers]

Another success! I think because I used PWM to throttle back the boil, my boil off rate was much reduced,

Did you determine your pulse width experimentally or did you use a feedback loop with a variable setpoint? I'm wondering if setting the boil to 212, 213, or some other temp would be optimal for a good steady boil without overdriving the element.