1BigBear
Well-Known Member
Collar came out OK, but on closer inspection I missed 'something' around the tap handles →(yeah, I simply should have took them off) duh-
Edit- I only applied the FINISH.. after Taps were inserted. Stained everything first-(Forgot to apply finish I was so eager to tap some kegs!)
Anyway by looking at the close-up picture you can see I missed either with a coat of stain, OR, I'm guessing my Minwax Clear Protective Finish. Applied with a small rubber brush.
I Re-applied some Finish to the areas, but it did NOT seem to help.
Don't want to stain over the Finish.....so, Actually, I don't know what to do at this point![Confused :confused: :confused:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Any wood/stain experts with some tips on how to fix this?
Thanks ~
BB
Edit- I only applied the FINISH.. after Taps were inserted. Stained everything first-(Forgot to apply finish I was so eager to tap some kegs!)
Anyway by looking at the close-up picture you can see I missed either with a coat of stain, OR, I'm guessing my Minwax Clear Protective Finish. Applied with a small rubber brush.
I Re-applied some Finish to the areas, but it did NOT seem to help.
Don't want to stain over the Finish.....so, Actually, I don't know what to do at this point
Any wood/stain experts with some tips on how to fix this?
Thanks ~
BB
![IMG_8933.jpg IMG_8933.jpg](https://cdn.homebrewtalk.com/data/attach/180/180253-IMG-8933.jpg)
![IMG_9015.jpg IMG_9015.jpg](https://cdn.homebrewtalk.com/data/attach/180/180254-IMG-9015.jpg)