• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

What is the difference and benefits between hops pellets and regular hops

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
With hops pellets, the general thought is they are more consistent in bitterness or aroma, as they are a combination of a crop.

Fresh hops may be less consistent but I personally have never used them so I will defer to someone who has more experience with them.
 
I have been brewing for 5 years now and just started using fresh hops about a year ago. The pellets are a lot more compact than the cones. I typically use 3-4 oz to 1 oz pellets. My opinion is that fresher is always better. Give it a try and see what you think. Good luck and happy brewing.
 
I use fresh dry hops that I grow. They take up more space, and I never really know how much aa I will get. I can smell how good they are and taste them to see how bitter they are. If you buy them you'll know what the levels are. really my only issue is the volume they take up. I definitely notice the freshness factor, they smell outstanding.
 
This is what I have seen YMMV.
Whole cone and leaf settle out nicely during chilling and don't look like animal feed. They are also good in a hop back and with other products where they act as a filter media for the wort. On the flip side dried are more prone to aroma loss (poor long term storage) because of exposed surface area and will absorb more wort during the boil. Fresh whole cone (also called wet hops) absorb less wort but you need 3x more since the aroma is not concentrated from drying.

Pellets absorb less wort, store better and are very potent for their size. They are much harder to separate from the wort unless whirl pooling or use a hop spider and look like animal feed.

This subject can go into much deeper detail and forgive me if I left something out.
 
Pellet hops are basically ground up & extruded; the hop oils they contain hold them together. You get better utilization (bitterness) from pellets due to the smaller size of the pieces; just like you get better extraction from coffee if it's a finer grind. Some brewers are particular about using whole hops--I believe Deschutes and maybe Sierra Nevada are somewhat religious about this.

As others have pointed out, you probably waste more wort using whole hops because the liquid hold up is larger.

There's some heat generated in the pelletizing process, so there is probably some loss of aroma compounds. However, for storage, pellets probably keep better.
 
In my experiences, I've noticed that, due to being crushed & pelletized, the pellets give up bittering more easily. The tiny lupulin glands are dried & crushed with the rest of the cone. As for whole leaf- dried- the flavor is more complex tasting to me. A " fuller" flavor you could say. More natural. Pellet flavors are sharper, more intense in that way.
 
My friend harvested his hops cascade shinook hallertau and a few nugget. From my experience I usually dry hop the cascades and Chinook. And and a few of the others late in the boil. I also use pellitized hops early in the boil because I know they're consistent. My preference is IPA'S several different hops added. Have fun and hoppy brewing.
 
Well, the hops are indeed where part of the magic happens to me. My Cougar Mountain IPA is resiny, citrusy, danck, fruity, etc for a pliny vs the rest sort of flavor. My Maori IPA uses all NZ hops for the citrus, berry, oaky, tropical fruit flavors. Then, my Hellfire IIPA uses US, UK, & NZ hops to emulate the fruity/slightly citrusy flavors of the super hot peppers also used in it. So different hop combos can be used to get some very specific flavor additions. :mug:
 
Back
Top