What I did for beer today

[Skeeter686]

My replacement chest freezer arrived, so I removed the collar from the old one, scraped off the silicone that I'd used for securing it to the old freezer, and attached the collar to the replacement. While the silicone was curing, I cleaned all the faucets, shanks, fittings, beer lines, etc.

Looking forward to pouring cold beer again!

 

[seatazzz]

Brewing up a blonde today, and got to thinking; might need a special celebration beer around end of October because baseball. What better beer to try to clone than Scuttlebutt's Big Dumper? They list what they use on their website, will be doable. If I do it next Sunday, will have some lagering time before the Big Week. Not going to jinx it by saying more!!

 

[day_trippr]

After 11 and 12 days respectively the two hazy batches I've been running are ready for a 48 hour 50°F soft-crash prior to dry hopping. I put all four carboys on low top pressure (~0.4 psi) CO2 providing by a pair of in-line BBQ regulators (hiding behind the bottle holder) to obviate any chance of pulling in O2, and set the controllers to do their thing...

Cheers!

 

[ScrewyBrewer]

Today I am cold-crashing a Pilsen/Citra SmAsH for a club project. Being the laziest person I know, this is one of my favorite parts of homebrewing. Just connect the CO2 to the fermentor, sit back, and watch as the temperature falls.

 

[CJ-3]

Yesterday I kegged the Kentucky Common I brewed on August 31.

 

[BrewZer]

Stirred up a recipe for my next batch: Super SMaSH Sa-Bros APA using 10 lbs of 2-row and an ounce of Sabro judiciously applied during the boiling process. Fermented out with US-05 around 68F, should bring me about 5 gallons of very pale, 5% ABV, citrusy/coconutty goodness.

 

[leedspointbrew]

Bottled (45) buckwheat honey porter. As expected and warned, very little honey flavor in the gravity reading sample that I tasted, but otherwise a solid porter, better than last iteration.
Inspired by some of MaxStout's recent posts, cleaned everything 3x instead of 2.

 

[Pennine]

Put all the equipment away, cleaned 2 kegs and took hydrometer samples of the Herfstbok and best bitter. I am happy with both yeasts, the Tim Taylor's dropped it down from 1.049 to 1.012 in a week and the Andechs from 1.068 to 1.014. low sulfur from the Andechs and no hint of sewers from Tim's.

 

[HM-2]

Dry hopped my hazy DIPA. 250g of pellets split 2:1 between Cryo and T90. 60% Simcoe, 40% Mosaic.

 

[Zadkiel]

Super SMaSH Sa-Bros

Love it. Genius.

 

[BrewZer]

Love it. Genius.

 

[Zadkiel]

View attachment 885273

My Quad currently cold conditioning:

 

[seatazzz]

Yesterday kegged off what was supposed to be a NEIPA fermented on Imperial Kveiking slurry; but due to an unfortunate event (i.e. I didn't label the yeast slurry growler) it fermented at 85 effing degrees on Nottingham slurry. Decided to let it ride since I didn't discover the error until after I pitched. Nothing but late hops and dry hops in this one, namely some slightly elderly El Dorado and relatively new Sabro, on a basic two-row malt base, came out about 6% and who knows what IBU because I don't care. Tapped it this afternoon since it's in a keg with a carb lid. And damn, maybe it's the hops covering any errors, but this one is TASTY. Lots of tropical flavors with that tiny hint of coconut on the back end that Sabro can throw.

 

[HM-2]

Yesterday kegged off what was supposed to be a NEIPA fermented on Imperial Kveiking slurry; but due to an unfortunate event (i.e. I didn't label the yeast slurry growler) it fermented at 85 effing degrees on Nottingham slurry.

IMO, a hazy fermented on Notty will (almost) always trump one fermented with Kveik.
Luckily Notty is pretty temperature resilient, I've fermented with it over 25°C several times with no ill effects.

 

[seatazzz]

IMO, a hazy fermented on Notty will (almost) always trump one fermented with Kveik.
Luckily Notty is pretty temperature resilient, I've fermented with it over 25°C several times with no ill effects.

Well crud. Now I'm upset with myself for trashing the slurry that was left. Googles wasn't much help after I discovered what I did, so I dumped it. Oh well, there's always next time....if I remember.

 

[Hoochin'Fool]

Brewed 3 gallons of 1052 pale ale wort. Bittered w/ Magnum for 30 ibus, cooled down to 175F and added a whole ounce of Superdelic hops, left on counter to slow-chill, while covered. Temp is down to 110 now, ninety minutes later. So far, the Superdelic seems pretty underwhelming. Getting a little flavor (juicy-fruit gum?) but not much else flavor or aroma wise.

 

[BeerNsteadofH2O]

Finished basic construction on my new bottling/washing/sanitizing station (repurposed from other project's) gave it a test sanitizing and bottling 49 bottles of Irish red... now that I've got the lift harness adjusted ( the base floats on rails_, ill replace the para cord with jack chain, the tabletop (made from go board) needs to be sealed ( go board is manufactured with fiberglass coating, and I reeeeealy dont want it in my beer) with bar top epoxy, as will anything that can get wet,.. I need to give all the wood a coat of epoxy paint ( again left over from boat project) then install the switches for the wash pumps.. having the winch sure beats lifting a bucket of beer with a ratcheting rope pulley .

 

[day_trippr]

It's "Dry Hop Day" here, with two ten gallon batches needing attention. One got 6 ounces of Azacca, Idaho7, and Strata, the other 6 ounces of the Holy Trinity - Citra, Mosaic and Simcoe. After measuring out the two doses I unassembled the pellets using my Cuisinart with the steel blade, then dumped the powder in the fermentors. The piles will slowly rain fragments over the rest of the day at least, saving me from disturbing the pancaked yeast by rousing...

Cheers!