• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Ways to have multiple kegs w/ different pressures?

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Gtrman13

Well-Known Member
Joined
Aug 17, 2010
Messages
234
Reaction score
2
Location
Greenville, SC
Suppose I two different kegs in my kegerator with a single regulator, but I'd like a different level of carbonation for each keg. Is there any way to achieve this? I know I could get a different regulator, but I'd just rather not do that. If I primed one with sugar to get a higher carb level than my regulators serving pressure, would it drop down to the serving pressure level when attached to the tank?
 
Yes...eventually, it would even out with the regulator. Only way to do this is to buy a mulitple body regulator.
 
I have 4 secondary regulators in my keezer. It's really the way to go. Just be catreful to get ones that are rated to operate at that temp, regulate at low psi, and are non releiving. Having a check valve between them and the beer is a good idea as well.
 
Back
Top