• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Those who have an at home RO filter setup

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Is the valve to pressurize the tank that hex nut?
 

Attachments

  • IMG_0587.jpeg
    IMG_0587.jpeg
    1.5 MB
I removed that white hex nut and there is an air valve (car/bicycle tire style) under it. I checked the pressure and it was at 0. I attempted to put air in and it almost immediately maxes out to 60psi. But this does not resolve the issue, I think there is something wrong internally and I am going to pick up a replacement tank.

I think that the 15-20 seconds of good water flow I get from the tank is just from the pressure built up from the RO water filling the tank from my household water pressure.
 
Last edited:
I removed that white hex nut and there is an air valve (car/bicycle tire style) under it. I checked the pressure and it was at 0. I attempted to put air in and it almost immediately maxes out to 60psi. But this does not resolve the issue, I think there is something wrong internally and I am going to pick up a replacement tank.

I think that the 15-20 seconds of good water flow I get from the tank is just from the pressure built up from the RO water filling the tank from my household water pressure.
That actually sounds reasonable if it's full of water yet, since there's no room for air to go. If you left the discharge open while adding air, you'd get a sense of the volume discharged by added air.
 
Your tank must be using a balloon style bladder attached to that larger white center thing in the middle of the tank bottom, leaving space around that for that air pressure line to the side. And it does sound like the bladder failed and the tank is full of water...
 
I found this one on amazon

iSpring T32M Pressurized Water Storage Tank with Ball Valve for Reverse Osmosis RO Systems, 4 Gallon, 1/4" Tank Valve Included https://a.co/d/3Nxfkra
 
Just remember that you'll only get about half the tank volume from a pressurized tank. That 4 gal tank will supply maybe 2 gal quickly and then the output will be just what the membrane can produce. Get a bigger tank if you need more immediate output. I have a 20 gal tank so that I can supply about 10 gal for my typical brew day.
 
Just remember that you'll only get about half the tank volume from a pressurized tank. That 4 gal tank will supply maybe 2 gal quickly and then the output will be just what the membrane can produce. Get a bigger tank if you need more immediate output. I have a 20 gal tank so that I can supply about 10 gal for my typical brew day.
correctamundo.
 
There's also nothing in it to allow biological projects to happen. If something that bugs can eat gets into your RO water, then it isn't really RO water anymore, is it?
 
Back
Top